Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo

Schlüter®-TROBA-LEVEL

Products


Schlüter®-TROBA-LEVEL-PL 10

Schlüter®-TROBA-LEVEL-PL 10 are stackable supports for tile and paver elements, regardless of their format and thickness. They are made of a special synthetic material with sound insulation effect and can be installed directly over the waterproofing assembly. The 3 mm connectors enable consistent joint appearance and are able to absorb movements in the covering. Schlüter®-TROBA-LEVEL-PL 10 can be stacked up to a height of 200 mm and can also be combined with other supports of the product range.

Schlüter®-TROBA-LEVEL-PL 10


Schlüter®-TROBA-LEVEL-PLA 30

Schlüter®-TROBA-LEVEL-PLA 30 are height adapters for tile and paver supports. From an assembly height of 50 mm, one or more Schlüter®-TROBA-LEVEL-PLA 30 adapters can be inserted between two Schlüter®-TROBA-LEVEL-PL 10 paver supports. Schlüter®-TROBA-LEVEL-PLA 30 can be stacked up to a height of 300 mm and can also be combined with other supports of the product range.

Schlüter®-TROBA-LEVEL-PLA 30


Schlüter®-TROBA-LEVEL-AP 1

Schlüter®-TROBA-LEVEL-AP 1 levelling platelets help to adjust the pavers in various slope situations. Differences in tile and paver thickness, uneven places in the ground or a minor slope can be adjusted by up to 10 mm per corner.

Schlüter®-TROBA-LEVEL-AP 1

Package = 250 pcs.


Schlüter®-TROBA-LEVEL-PLV 60

Schlüter®-TROBA-LEVEL-PLV 60 are adjustable supports that can be variably adjusted from 60 - 130 mm with an adjustment ring and two opposing threads. The identical support at the head (diameter 120 mm) enables individual stacking in combination with Schlüter®-TROBA-LEVEL-PL 10 and -PLA 30. If necessary, Schlüter®-TROBA-LEVEL-AP 1 levelling platelets can be used for precision adjustment and slope levelling. Assembly heights up to 520 mm can be achieved by stacking two or more Schlüter®-TROBA-LEVEL-PLV 60 units. The support head is equipped with 3 mm joint spacers and features an additional perimeter spacer.

Schlüter®-TROBA-LEVEL-PLV 60


Schlüter®-TROBA-LEVEL-LV 3

Schlüter®-TROBA-LEVEL-LV 3 are bottom plates for load distribution in conjunction with Schlüter®-TROBA-LEVEL-PL 10, -PLA 30 and -AP 1. The bottom plates also allow for creating structures with low assembly heights. Schlüter®-TROBA-LEVEL-LV 3 can be cut to size and features 3 mm connectors.

Schlüter®-TROBA-LEVEL-LV 3


Schlüter®-TROBA-LEVEL-PLA 70

Schlüter®-TROBA-LEVEL-PLA 70 are height adapters for supported paver coverings. They are screwed into the bottom plate of Schlüter®-TROBA-LEVEL-PLV 60.

Schlüter®-TROBA-LEVEL-PLA 70


Schlüter®-TROBA-LEVEL-PLS 6

Schlüter®-TROBA-LEVEL-PLS 6 are seal protection pads made of rubber granulate. The bottom plates of Schlüter®-TROBA-LEVEL-PLV 60 or Schlüter®-TROBA-LEVEL-LV 3 must be attached in the slitted incisions of the protective pads Schlüter®-TROBA-LEVEL-PLS 6 (6 mm). In the case of PVC waterproofing assemblies, the aluminium separating layer of the protective pads must be installed facing down. If using Schlüter®-TROBA-LEVEL-PL 10, these must be placed in the centre of the pads.

Schlüter®-TROBA-LEVEL-PLS 6

Package = 10 pcs.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit