Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information



Application and Function

Schlüter®-TROBA-LEVEL is a combinable tile and paver support system that enables individual assembly heights from 3 mm to over 1 m. It is suitable for levelling any sloped assembly of up to 10%.

Loose installation is suitable for balconies, terraces, roof terraces and other accessible spaces. It enables access to pipelines and floor drains in the remaining hollow space. Please refer to the Technical Data table later in this document for information about combination options and further details.

Due to the open joints between the tiles and pavers, the finished covering can drain to the waterproofing assembly of the terrace that is constructed with the corresponding slope. Any water accumulating at this level is then channeled to the drainage system without pressure.

The stackable tile and paver supports Schlüter®-TROBA-LEVEL-PL 10 are designed to support tiles and pavers, regardless of their format and thickness. They have a height of 10 mm, are made of a sound-insulating special synthetic material and can be installed directly over the waterproofing assembly. The 3 mm joint spacers enable a consistent joint appearance and are able to absorb movements in the covering.

The adapter blocks Schlüter®-TROBA-LEVEL-PLA 30 can be installed from an assembly height of 50 mm. They are placed, either individually or combined, between two Schlüter®-TROBA-LEVEL-PL 10 tile and paver supports.

Schlüter®-TROBA-LEVEL-AP 1 levelling platelets help to adjust the pavers in various slope situations. Differences in paver thickness or uneven places in the ground can be adjusted by stacking up to 10 Schlüter®-TROBA-LEVEL-AP 1 in each tile or paver corner.

Schlüter®-TROBA-LEVEL-PLV 60 are pre-assembled, adjustable tile and paver supports that can be variably adjusted from 60 - 130 mm with an adjustment ring and two opposing threads. The thread of Schlüter®-TROBA-LEVEL-PLV 60 features a protection mechanism against accidental loosening and a vibration lock. The Schlüter®-TROBA-LEVEL-PLV 60 incorporates 3mm joint spacers and a perimeter spacer.

Depending on the condition of the substrate, Schlüter®-TROBA-LEVEL-LV 3 can be installed in combination with Schlüter®-TROBA-LEVEL-PL 10 and Schlüter®-TROBA-LEVEL-PLA 30 for load distribution. Schlüter®-TROBA-LEVEL-LV 3 can also be used as stand-alone tile and paver supports in combination with Schlüter®-TROBA-LEVEL-AP 1 for particularly low assembly heights. Schlüter®-TROBA-LEVEL-LV 3 features 3 mm joint spacers.

The height adapters Schlüter®-TROBA-LEVEL-PLA 70 are fully screwed into the bottom plate of Schlüter®-TROBA-LEVEL-PLV 60. The thread of Schlüter®-TROBA-LEVEL-PLA 70 features a protection mechanism against accidental loosening and a vibration lock.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:


Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit