Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo

The ceramic thermal comfort floor

Schlüter®-BEKOTEC-THERM

Schlüter®-BEKOTEC-THERM combines environmentally friendly heating comfort with hygiene and cosiness. The patented floor assembly, which boasts a low construction height and an innovative heating and control technology, turns the entire system into a low energy, cost-saving, and quick-reacting “thermal comfort floor” with especially low flow temperatures.

But that is not all: the advantages of the ceramic thermal comfort floor start right at the time of construction because of its quick and uncomplicated installation.

ENVIRONMENTALLY FRIENDLY & COMFORTABLE.

Save energy and reduce heating costs

Because of the patented thin layer construction of the ceramic thermal comfort floor, the total screed mass to be heated is comparatively small. As a consequence, floor-heating systems can be operated with low flow temperatures. Thanks to Schlüter®-DITRA 25’s ability to distribute heat evenly, the heat is rapidly spread over a large area, making an entire room comfortable in a short amount of time.

Ceramic thermal comfort floors are ideally suited for operation with environmentally friendly heat pumps. However, the low operating temperatures also protect the environment if they rely on conventional heat generation and are good to your wallet as well!

FAST.

Move in earlier, thanks to shorter construction time

Thanks to the special construction of the ceramic thermal comfort floor, tiles can be installed on top of the system component, Schlüter®-DITRA 25, as soon as the screed is ready to bear weight.

This eliminates long waiting periods for drying the screed and lengthy functional heating periods to bring the covering to temperature. Since the thinner screed requires much less material, the final construction is lighter and lower than conventional installations, saving considerable construction time.

SYSTEMATIC SAFETY.

Thanks to the patented assembly of the ceramic thermal comfort floor, stresses that build up in the construction are neutralised. Schlüter®-BEKOTEC-THERM can offer you a permanently damage free, heated tile floor that you will enjoy for a long time to come.

Schlüter®-BEKOTEC-THERM

Schlüter®-BEKOTEC-THERM

Schlüter®-BEKOTEC-THERM is a reliable covering assembly with low construction height. The combination with the corresponding heating and control technology results in an energy-efficient and highly responsive floor heating system with especially low supply temperatures. 

For more information about the ceramic thermal-comfort floor, visit:

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

image
Flow temperature

The flow temperature is the temperature of the hydronic medium being put into the thermal comfort floor (e.g. water). The height of this temperature depends on the area heated as well as the desired temperature inside the room.

In former times, the flow temperature used to be 70-90°C.

Its extraordinary low flow temperature of about 30°C makes Schlüter®-BEKOTEC-THERM the ideal partner for a combination of heat pump and solar panels, as the energy produced by the panels can be used to heat water for the domestic use in bathroom and kitchen as well.

image
Security guaranteed

Independant expert´s reports confirm the high quality of the system. Many references and our guarantee of five years - not only for the single components but for the construction as a whole - result in a very high level of security and technical leadership.