Schlüter®-BEKOTEC-SLS
Schlüter®-BEKOTEC-SLS is a flowable self levelling screed with extremely low tension and smooth finish that was specifically developed for creating floating screeds for Schlüter®-BEKOTEC floor assemblies.
Read more
Schlüter®-BEKOTEC-DPS
Schlüter®-BEKOTEC-DPS is an easy to install screed with extremely low tension for interior and exterior use. Specifically developed for creating floating screeds (as well as bonded screeds) for Schlüter®-BEKOTEC systems.
Read more
Schlüter®-BEKOTEC-EN 2520 /-EN 1520 PF
Schlüter®-BEKOTEC is a modular screed system for crack free and functionally safe floating screeds and heated screeds with coverings made of ceramic tiles, natural stone or other materials.
Read more
Schlüter®-BEKOTEC-ENR
Schlüter®- BEKOTEC-ENR is an edge panel made of polystyrene (EPS 040 DEO) for optimising cuts of Schlüter®- BEKOTEC studded panels EN/P and EN/PF, adding small areas or filling small spaces between walls and upright structural elements.
Read more
Schlüter®-BEKOTEC-EN 23 F
Schlüter®-BEKOTEC-F is a safe and especially thin cover assembly system for damage free and functionally safe floating screeds and heated screeds with ceramic tile or natural stone coverings. The Schlüter®-BEKOTEC screed is also suitable for other covering materials.
Read more
Schlüter®-BEKOTEC-ENFG / -ENFGTS / -ENFGK
The levelling panel Schlüter®-BEKOTEC-ENFG / -ENFGTS / -ENFGK is installed in the area of door openings and heating circuit distributors to simplify connections and to minimise cutting waste. It consists of polystyrene foil material and is adhered below the studded panels Schlüter®- BEKOTEC-EN 23 F, using the double sided adhesive tape.
Read more
Schlüter®-BEKOTEC-ZRKL
Schlüter®- BEKOTEC-ZRKL is a pipe clamping strip for securing the pipes on the levelling panel. The clamping strips are self-adhesive to allow for permanent attachment.
Read more
Schlüter®-BEKOTEC-ZDK
Schlüter®- BEKOTEC-ZDK66 is a double sided adhesive tape for adhering the studded panel to the substrate or the levelling panels.
Read more
Schlüter®-BEKOTEC-BTS
Schlüter®- BEKOTEC-BTS is a 5 mm thick insulation layer of closed cell polyethylene foam for installation below the studded screed panels Schlüter®- BEKOTECEN/ P and -EN/PF. The use of Schlüter®- BEKOTEC-BTS results in a significant improvement of sound insulation. The material can be used if the required construction height is not sufficient for a thick insulation layer of polystyrene or mineral fibre. The maximum floor load must be limited to 2 kN/m².
Read more
Schlüter®-BEKOTEC-BRS
Schlüter®- BEKOTEC-BRS is an edging strip of closed cell polyethylene foam with an integrated foil leg. The edging strip is installed along walls or fixed room components. The foil leg is installed beneath the Schlüter®- BEKOTEC panels or the PE foil cover and is suitable for conventional cement screeds. The finishing strip Schlüter®- BEKOTEC-BRSK is equipped with an additional adhesive strip for attachment to the wall.
Read more
Schlüter®-BEKOTEC-BRS/KF
Schlüter®- BEKOTEC-BRS/KF is an edge strip of closed cell polyethylene foam with an adhesive leg and an adhesive backing for wall attachment. When the Schlüter®- BEKOTEC studded panel is laid on the PE adhesive, the resulting connection prevents flowing screeds from running underneath the assembly during installation.
Read more
Schlüter®-BEKOTEC-BRS/KSF
Schlüter®- BEKOTEC-BRS/KSF is an edging strip of closed cell polyethylene foam with an integrated foil leg that features an adhesive strip on both sides for attachment. The edging strip is pressed toward the wall by the adhesion on the substrate and the pre tensioning of the integrated foil leg. When the studded panel Schlüter®- BEKOTEC is laid on top of the adhesive strip, flowing screed can no longer flow underneath the panel.
Read more
Schlüter®-DILEX-DFP
Schlüter®-DILEX-DFP is a movement joint profile to be installed at door areas or used to divide screed areas.
Read more