System assembly | Schlüter-Systems

System assembly

This picture shows the assembly structure of the Schlüter®-BEKOTEC-THERM ceramic thermal comfort floor with the associated system components. The numbers in the image represent the corresponding products of the system assembly. In addition, we can provide detailed technical data sheets for more comprehensive information.

  1. Schlüter®-BEKOTEC-EN

    Studded screed panel for the attachment of Schlüter heating pipes. Additional insulation and construction standards must be observed in accordance with the applicable technical guidelines.

  2. Schlüter®-BEKOTEC-BRS

    Screed edging strip.
    The edge strip BRS 808 KSF must be used with the studded screed panel EN 23 F.

  3. Schlüter®-BEKOTEC-THERM-HR

    Heating pipe

  4. Schlüter®-BEKOTEC-THERM-HV

    with connection accessories
    a) hot flow leg
    b) cold return leg

  5. Schlüter®-BEKOTEC-THERM-VS

    Distributing cabinet

  6. Schlüter®-BEKOTEC-THERM-E

    Electronic temperature control
    a) interior thermostat
    b) actuator
    c) control module.

  1. Schlüter®-DILEX-EK or -RF

    Maintenance free edge and movement joint profiles

  2. Schlüter®-RONDEC, Schlüter®-JOLLY or Schlüter®-QUADEC

    Decorative finishing profiles for walls, skirting and floors

  3. Screed

    Cement or calcium sulfate screed

  4. Thin-bed tile adhesive

  5. Ceramic tiles or natural stone

    Other coverings such as carpet, laminates and parquet are also feasible in compliance with the applicable installation standards.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?