Schlüter®-SHOWERPROFILE-S / -R | Products | Schlüter-Systems




Schlüter®-SHOWERPROFILE-S is a triangular profile made of a brushed stainless steel flat profile with 2% slope for covering the sloped edges of floor level showers. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive. A matching hard PVC support profile is available in different heights and features a U-shaped installation channel. The triangular profile can be shortened as necessary on the short and/or long side to accommodate height adjustment. The triangular profile can be used on the left or right side of the floor transition or below the tiles of a lateral wall.

Note: Tapered profiles with heights of 15, 18 and 22 mm are available on request.


SPS 50 is suitable for tile thicknesses of 6–9 mm

Schlüter®-SHOWERPROFILE-SB  tables 37097

SPS 100 is suitable for tile thicknesses of 10–18 mm


SPS 125 is suitable for tile thicknesses from 12,5 to 20 mm


Schlüter®-SHOWERPROFILE-R is a two part wall transition profile for covering the wall area exposed due to the use of a wedge with a line drainage channel. The visible surface of the profile consists of brushed stainless steel. A fleece fabric is laminated the reverse for bonding with the tile adhesive. Due to the two part design, Schlüter®-SHOWERPROFILE-R can be seamlessly adjusted to any height between 23 and 45 mm (available in two versions).


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit