Schlüter®-SHOWERPROFILE-S / -R | Material | Schlüter-Systems



EB = brushed stainless steel V4A material no. 1.4404 = AISI 316L

A fleece fabric is laminated on the backside of the profiles for bonding with the tile adhesive. The support profile of Schlüter®- SHOWERPROFILE-S is made of rigid recycled PVC. The visible surface of the profile is covered with a protective foil.

Material properties and areas of application:

The suitability of the profiles must be verified based on the anticipated chemical and mechanical stresses. Schlüter®- SHOWERPROFILE-S and -R of stainless steel V4A (material no. 1.4404 = AISI 316L) are particularly suitable for high mechanical impact or special exposure to chemicals. Even stainless steel of quality 1.4404 is not resistant to all chemical stresses, and may be affected, e.g., by hydrochloric and hydrofluoric acid or certain chloride and brine concentrations, which may be present in detergents or swimming pools. Special anticipated stresses should therefore be verified in advance.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit