logo

Schlüter®-DESIGNBASE-SL

Installation

  1. Adhere Schlüter-DESIGNBASE-SL with the installation adhesive KERDI- FIX or an equivalent material. Apply a sufficient number of adhesive spots on the reverse of the profile - above and below the spacer in the case of DESIGNBASE- SL-E; see illustration - and set the profile in place.
    Remove any substances that may inhibit bonding, such as grease etc. prior to applying the installation adhesive.
    Note: Optionally, the profile can be fitted with a sealing lip that is available as an accessory (see drawing) to protect the edge joint from moisture and to reduce the transmission of impact sound. The sealing lip is pressed firmly into the profile from the front for the aluminium variant, or clipped on from the back for the stainless steel variant, so that its front edge is flush with the profile (see drawing for correct/incorrect installation).
  2. Remove any excess adhesive with a suitable cleaning product.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit