Schlüter®-BEKOTEC-THERM-ER | Schlüter-Systems


Schlüter®-BEKOTEC-THERM-ER is a “cooling/heating” room sensor with a flat design for wired thermostats.

The device transmits the current room temperature and the set-point value to the connection module for room sensors. The set-point temperature is adjustable from 8° to 30°C and can be restricted below the dial with set-point limiters.

A timer unit on the “Control” base module can effect a time-controlled temperature reduction of 4°C. The room sensor is operated with 5 V DC safety extra-low voltage (SELV) via the “Control” base module in conjunction with the connection module for room sensors.

The operating state “heating/cooling” is displayed by the “red/blue” colour change of a light-emitting diode (LED).



Colour: BW = Brilliant white

Dimensions W/H/D: 78 x 78 x 12.5 mm

Note: Only cables with maximum wire cross-sections of 0.8 mm² may be connected between the room sensors Schlüter®-BEKOTEC- THERM-ER and the connection modules for 2 or 6 BT ER room sensors.

Cable recommendation: BTZK 4A 100M, J-Y (St) Y 2 x 2 x 0.6 mm (red, black, white, yellow)

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit