Schlüter®-BEKOTEC-DPS | Material | Schlüter-Systems


Material properties and areas of application

The extremely low-tension screed has been specifically developed for use with the BEKOTEC studded system panels EN/P and EN/PF, EN 23 F, EN 18 FTS, EN 12 FK and BEKOTEC-DRAIN studded system panel.

The screed is installed with a minimum coverage of 8 mm over the studs. In case of uneven substrates, the coverage of EN/P, EN/PF, EN 23 F or EN 23 FD panels can be partially increased to max. 25 mm (max. 20 mm for EN 18 FTS, max. 15 mm for EN 12 FK) over the studs. The screed can be installed without joints unless there is a requirement to prevent sound transmission between adjacent rooms. Expansion, movement and/or day joints from the substrate must be continued through the assembly to the surface covering. Edge strips must be installed at all wall transitions, supports etc. in such a way that the screed volume cannot flow underneath (for further information, see the technical product data sheets for individual Schlüter® products).

Prior to installing the screed, heated systems must be pressure tested to rule out leakages. It must be assured that the system is not heated during the installation and curing process of the screed.

The applicable standards and relevant regulations for conventional screed installations must be observed.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit