Schlüter®-RONDEC-STEP/-STEP-CT | Material | Schlüter-Systems



Schlüter®-RONDEC-STEP is made of aluminium and is available in a variety of finishes.
AE = Anodised Aluminium
ACGB = Brushed chrome anodised aluminium

Material properties and areas of application
Schlüter®-RONDEC-STEP must be tested to verify its suitability if chemical exposure is expected. Cementitious materials, in con- junction with moisture, become alkaline.

Since aluminium is sensitive to alkaline sub- stances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminium hydroxide formation).

For this reason, remove mortar or grouting material immediately from all visible areas and do not cover freshly installed coverings until dry.

In addition, make sure that the profile is solidly embedded in the setting material to prevent alkaline water from accumulating in small cavities. Schlüter®-RONDEC-STEP profiles have an anodised surface layer that retains a uniform appearance during normal use. Protect the surface from abrasion or scratching.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit