Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-RONDEC-STEP/-STEP-CT

Installation

  1. Select Schlüter®-RONDEC-STEP according to tile thickness and thickness of the substrate.
  2. Apply tile adhesive using a notched trowel over the area where the profile is to be placed.
  3. Press the perforated anchoring leg of Schlüter®-RONDEC-STEP into the adhesive bed and align.
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage and support of the tile edges.
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower. All tiles in the profile area must be completely set.
  6. The tile is set tight against the integrated joint spacer, which ensures a uniform grout joint of 1.5 mm.
  7. If using Schlüter®-RONDEC-STEP-CT, cut the width of the decorative insert to size and attach it with a suitable adhesive.
  8. Fill the space between the tile and the profile completely with grout.
  9. When installing sensitive surfaces, work with materials and tools that will not scratch or damage the surface. Remove residual adhesive or setting material immediately.
  10. Matching pre-formed internal and external corner pieces are available.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit