Schlüter®-RENO-V | Function | Schlüter-Systems
logo

Schlüter®-RENO-V

Application and Function

Schlüter®-RENO-V is a profile with an adjustable arm for creating stepless transitions between floor coverings of different heights; e.g. the transition between tile and carpet. In addition, the profile effectively protects the edges of adjacent coverings.

The movable transition arm, via a ball-andsocket joint, allows the profile to adjust to the height of the adjacent covering. Thus the occurrence of trip edges between coverings of different heights is eliminated.

Schlüter®-RENO-V is also suitable for heavy-duty applications (e.g. entrances to garages or loading docks). In such cases, the adjustable arm is back-filled with mortar.


Schlüter®-RENO-V

Installation

  1. Select Schlüter®-RENO-V according to tile thickness.
  2. Using a notched trowel, apply dry-set adhesive to the area where profile is to be placed.
  3. Press the perforated anchoring leg of Schlüter®-RENO-V into the adhesive and align.
  4. Trowel additional dry-set adhesive over the perforated anchoring leg to ensure full coverage and support of the tile edges.
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower.
  6. The tile is set to the lateral joint spacer, which ensures a uniform joint of 1.5 mm.
  7. Fill the joint between the profile and the tile completely with grout. Place the adjustable arm onto the adjacent covering and, if applicable, adhere with silicone or similar. For areas exposed to heavy loads, back-fill the adjustable arm with mortar.

Schlüter®-RENO-V

Material

Schlüter®-RENO-V is available in the following materials:
A     = aluminium
AE  = anodised aluminium


Material properties and areas of application

In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/ or other stresses.

The suitability of Schlüter®-RENO-AV, in aluminium, must be verified based on anticipated chemical stresses. Aluminium is sensitive to alkaline substances. Since cementitious materials, in conjunction with moisture, become alkaline, prolonged exposure to these materials may result in corrosion (aluminium hydroxide formation).

Therefore, adhesive or grout residue must be removed immediately from visible surfaces. Schlüter®-RENO-AEV, in anodised aluminium, features an anodised layer that retains its appearance during normal use. The surface, however, must be protected from abrasion. Adhesive and grout can scratch the surface of the profile; therefore, any residue must be removed immediately. Otherwise, the description regarding aluminium applies.


Schlüter®-RENO-V

Maintenance

Schlüter®-RENO-V requires no special maintenance. Damage (i.e. from abrasion) to the anodised layer can be repaired with a coat of lacquer.

Schlüter®-RENO-V

Products


Schlüter®-RENO-V

Schlüter®-RENO-V requires no special maintenance. Damage (i.e. from abrasion) to the anodised layer can be repaired with a coat of lacquer.Schlüter®-RENO-V is a profile with a variable transition leg for smoothly joining floor coverings of different heights. The integrated spacer creates a uniform grout joint.

Schlüter®-RENO-V


Schlüter®-RENO-V


Schlüter®-RENO-VT

Schlüter®-RENO-VT is the support profile for the variable transition legs Schlüter®-RENO-VB. Both products can be combined in both lengths.

Prices for Schlüter®-RENO-VT and Schlüter®-RENO-VB in lengths of 1 m are available upon request (please indicate the Art.-No. e.g. AVT 80/100).

Schlüter®-RENO-VT


Schlüter®-RENO-AEVT


Schlüter®-RENO-VB

Schlüter®-RENO-VB is the variable transition leg which can be combined with the support profile Schlüter®-RENO-VT support section. They can be combined with each other in all sizes.

Prices for Schlüter®-RENO-VT and Schlüter®-RENO-VB in lengths of 1 m are available upon request (please indicate the Art.-No. e.g. AVT 80/100).

Schlüter®-RENO-VB


Schlüter®-RENO-AEVB


Schlüter®-RENO-V

Download


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit