Schlüter®-RENO-U/-RAMP/-RAMP-K | Installation | Schlüter-Systems



  1. Select Schlüter®-RENO-U / -RAMP according to tile thickness.
  2. Fill the cavity beneath the sloped section of the profile with tile adhesive.
  3. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
  4. Press the perforated anchoring leg of the Schlüter®-RENO-U / -RAMP into the tile adhesive and align.
  5. Trowel additional adhesive over the perfo- rated anchoring leg to ensure full coverage.
  6. Solidly embed the tiles so that the tiled surface is flush with the top of the profile (the profile should not be higher than the tiled surface, but up to approximately 1 mm lower). The tiles must be fully embedded in the area of the profile.
  7. The tile is set to the lateral joint spacer, which ensures a uniform joint of 1.5 mm. With the stainless steel profiles, leave a space of approximately 1.5 mm.
  8. Fill the joint completely with grout.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit