Schlüter®-RENO-TK | Material | Schlüter-Systems



The profile is available in the material types:

  • E = Stainless steel, 1.4301 (V2A)
  • EB = Brushed stainless steel
  • A = Aluminum
  • M = Brass
  • AE = Anodised aluminum

Material properties and areas of application

In special cases the suitability of a proposed type of profile must be verified, based on anticipated chemical, mechanical and/or other stresses.

Schlüter-RENO-ETK/-EBTK is made of roll-formed stainless steel V2A (material no. 1.4301). Stainless steel is particularly well suited for applications that, in addition to heavy mechanical stresses, require resistance to chemicals such as acidic or alkaline media and detergents. Even stainless steel is not resistant to all chemical stresses, and may be affected by, e.g., hydrochloric and hydrofluoric acid or certain chloride and brine concentrations. In certain cases, this also applies to seawater pools. Special anticipated stresses should therefore be verified in advance.

Schlüter-RENO-MTK are profiles made of brass. Minor marks from the manufacturing process cannot be avoided on their untreated surface areas. Brass is resistant to nearly all chemicals used in tiled environments. When exposed to air, the visible surface area of brass profiles will oxidise, resulting in a natural patina. Exposure to moisture or aggressive substances can cause heavy oxidation and spotting.

Schlüter-RENO-ATK are profiles made of aluminium. Minor marks from the manufacturing process also cannot be avoided on their untreated surface areas. The suitability of the profiles must be verified based on the anticipated chemical stresses. Since aluminium is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and pene- tration time) may result in corrosion (aluminium hydroxide formation).

Therefore, it is important to remove adhesive or grout residue from visible surfaces. In addition, ensure that the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water.

Schlüter-RENO-AETK is made of clear satin anodised aluminium. The anodised layer creates a finish that retains a uniform appearance during normal use.

Aggressive substances or abrasion may cause damage to the surface. Therefore, it is important to remove adhesive, mortar or grout residue from visible surfaces. Otherwise, the same statement as for aluminium applies.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit  

Schlüter® profiles with radius perforations
Schlüter® profiles with radius perforations


Bending machine for profiles with radius perforations.