Schlüter®-RENO-T | Installation | Schlüter-Systems



  1. To install the Schlüter®-RENO-T transition profile, the joint cavity must be at least 9 mm deep and free from debris. Substances which inhibit adhesion must be removed from the sides of the joint.
  2. Prefill the joint chamber with Schlüter®-KERDI-FIX or an equivalent. Then press the vertical spacer of Schlüter®-RENO-T into the filled joint until the lateral spacers are flush with the edges of the covering.
  3. Remove any excess adhesive that is squeezed out from underneath the profile anchoring legs with a suitable detergent.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit