Schlüter®-REMA | Installation | Schlüter-Systems



  1. Adhere the tile magnets (1) to the back of the wall tile with tile adhesive. The magnets must fully extend over the edge of the tile into the opening.
  2. Set the wall tiles with the adhered magnets at the edges of the opening so that four magnets protrude into the opening.
  3. Use silicone to adhere the counter-plates (2) to the back of the cover, matching the position of the magnets.
    3a. For larger openings, create a cover from the respective number of tiles by joining them with a tile adhered to the rear.
  4. Once the silicone has properly cured, set the cover panel in place and close the perimeter joint with sealant compound in a matching colour.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit