Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo

Schlüter®-QUADEC

Material

Schlüter®-QUADEC is available in the following materials:

MC = Chrome plated brass
E = Stainless steel
EB = Brushed stainless steel
EP = Polished stainless steel
ES = Structured stainless steel
EV4A = Stainless steel 1.4404 (V4A)
AE = Anodised aluminium
ACG = Polished chrome anodised aluminium
ACGB = Brushed chrome anodised aluminium
AT = Satin titanium anodised aluminium
ATG = Polished titanium anodised aluminium
ATGB = Brushed titanium anodised aluminium
AEX = Cross brushed anodised aluminium
AMX = Cross brushed brass anodised aluminium
ATX = Cross brushed titanium anodised aluminium
AQGX = Cross brushed quartz grey anodised aluminium
AC = Colour coated aluminium
TS = Tuscan textured aluminium
PQ = Coloured PVC

Material Properties and Areas of Application:

Schlüter®-QUADEC is available in a wide range of different materials and finishes. In certain applications, the suitability of the profile must be verified based on the anticipated chemical and mechanical stresses. The information provided below is intended as a general guideline. Schlüter®-QUADEC-MC (brass with chrome finish) is suitable for wall corners and the edges of tile coverings, e.g. to match chrome plated fittings in bathrooms. Visible surfaces should be protected against abrasion. Mortar and grouting material should be removed immediately.

Schlüter®-QUADEC-E is made of roll formed stainless steel V2A (material no. 1.4301) or V4A (material no. 1.4404). Schlüter®-QUADEC-E is highly durable and especially suited for application areas that must be resistant to chemicals and acids, such as food industry facilities, breweries, dairies, industrial kitchens and hospitals, as well as residential areas. The use of V4A is recommended if consistent exposure is expected, for example in the case of swimming pools (fresh water). Stainless steel is not resistant to all chemical stresses, and may be affected by hydrochloric and hydrofluoric acid or certain chlorine and brine concentrations. Special anticipated stresses should therefore be verified in advance. Depending on the anticipated chemical stresses, customers can choose between the alloy materials 1.4301 or 1.4404.

Schlüter®-QUADEC-AE / -ACG / -ACGB / -AEX / -AMX / -ATX / -AQGX / -AT / -ATG / -ATGB (anodised aluminium): The aluminium features an anodised surface layer that retains a uniform appearance during normal use. Visible surfaces should be protected against abrasion. Aluminium is sensitive to alkaline. Cementitious materials, in conjunction with moisture, become alkaline. Depending on the concentration and duration of exposure, this may result in corrosion (aluminium hydroxide formation). For this reason, remove mortar or grouting material immediately from all visible areas and do not remove the protective plastic cover from the profile until completely clean. In addition, ensure that the profile is solidly embedded in the setting material to prevent water from accumulating in small cavities.

Schlüter®-QUADEC-AC (colour coated aluminium): The aluminium is pretreated (chrome plated) and powder coated with a polyurethane covering. The coating is colour stable, as well as UV and weather resistant. Visible edges should be protected against abrasion.

Schlüter®-QUADEC-TS (tuscan textured aluminium): The aluminum is coated with metal dust, colour coated, and sealed. The coating is colour stable. Visible edges should be protected against abrasion. The surfaces of Schlüter®-QUADEC-TS profiles have a natural appearance. Variations in colour and texture are intentional.

Schlüter®-QUADEC-PQ (coloured PVC) are made of solidly coloured rigid PVC and are resistant to bending or scratching. The material is UV resistant, but not permanently colourfast in outdoor areas. The profile is not suitable for the corners and edges of coverings that are exposed to heavy mechanical stresses, e.g. at stair nosings or flooring edges.

Note:
Due to different manufacturing technologies, slight colour discrepancies between the profiles and the corners cannot be completely ruled out.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit  


Schlüter® profiles with radius perforations
Schlüter® profiles with radius perforations

Schlüter®-RUMA
Schlüter®-RUMA

Bending machine for profiles with radius perforations.