Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo

Schlüter®-QUADEC

Installation

  1. Select Schlüter®-QUADEC in accordance with the tile thickness.
  2. Apply tile adhesive with a notched trowel in the finishing area of the tile covering. If Schlüter®-QUADEC is to be installed at an external wall corner, complete tiling the first wall and then apply tile adhesive to the second wall.
  3. Fully embed the perforated anchoring leg of Schlüter®-QUADEC in the adhesive and align the profile.
  4. Trowel tile adhesive over the perforated anchoring leg and also fill the open profile chamber with adhesive.
  5. Firmly install the adjoining tiles and align them flush with the upper edge of the profile. Ensure that the tiles are fully embedded in the profile area.
  6. The tile is set to the lateral joint spacer, which creates an evenly spaced joint of 1.5 mm. In the case of stainless steel profiles, a joint of approx. 1.5 mm is recommended. Completely fill the space between the tile and the profile with grout.
  7. When working with sensitive surface materials, use only materials and tools that will not scratch or cause other damage. Immediately remove all mortar and tile adhesive residue.
  8. Matching prefabricated pieces are available for internal and external corners.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit  


Schlüter® profiles with radius perforations
Schlüter® profiles with radius perforations

Schlüter®-RUMA
Schlüter®-RUMA

Bending machine for profiles with radius perforations.