Schlüter®-QUADEC-FS | Installation | Schlüter-Systems



  1. Schlüter®-QUADEC-FS can be used in flush assemblies with tiles that are thicker than 11 mm. If thinner coverings are used, the profile protrudes over the adjoining covering.
  2. Install the tile covering up to the location where Schlüter®-QUADEC-FS is to be installed as a decorative strip. Apply a sufficient amount of tile adhesive to this location or the back of Schlüter®-QUADEC-FS and embed the profile in such a way that the visible surfaces are flush with the adjoining tile covering or protrude evenly over it. 
  3. Install the next adjoining row of tiles, leaving a space of approx. 2 mm between the tile and the profile for grouting.
  4. Use suitable materials and tools for the sensitive surfaces to avoid scratches or other damage. Mortar and tile adhesive should be removed immediately.
  5. Matching preformed inside and outside corner pieces are available

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit