Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo

Loose installation of natural stone and concrete pavers

done safely with Schlüter-Systems

The loose installation of pavers and tiles on balconies and terraces (on gravel/crushed stone beds or stilted supports) is an alternative for bonded assemblies. 

Balconies with loose installation can be created in a few work steps, which can be much faster than a bonded assembly. The pavers can be removed without damaging the balcony structure. 

Schlüter-Systems offers innovative system products for three different structural assemblies of damage-free balconies made of loosely installed pavers.

Schlüter®-TROBA-LEVEL

Schlüter®-TROBA-LEVEL

With Schlüter®-TROBA-LEVEL, you can quickly install self-supporting tile and pavers on balconies and terraces with lasting precision. The small number of different product components can be variably combined to reliably level virtually any slope and construction site situation. Starting from assembly heights of 3 mm!
Read more

Structural assemblies installed over gravel/crushed stone beds

Structural assemblies installed over gravel/crushed stone beds

Loose installation of self-supporting pavers and tiles on gravel or crushed stone beds and the drainage mat Schlüter®-TROBA.
Read more

Loose installation over Schlüter®-TROBA-PLUS 8G using thin-bed mortar points with Schlüter®-TROBA-STELZ-DR

Loose installation over Schlüter®-TROBA-PLUS 8G using thin-bed mortar points with Schlüter®-TROBA-STELZ-DR

Point fixation of self-supporting pavers and tiles on the drainage membrane Schlüter®-TROBA-PLUS 8G.
Read more

Structural assemblies over mortar stilts

Structural assemblies over mortar stilts

Loose installation of self-supporting pavers and tiles with stilted support on casting mold rings for larger assembly heights.
Read more

Profile cross sections

Schlüter®-BARA-RT

Schlüter®-BARA-RT

Schlüter®-BARA-RT is a T shaped finishing profile of colour coated aluminium for covering exposed edges of balconies and terraces. The top leg covers the edge of the assembly while the lower leg forms a drip edge and hides the joint with the Schlüter®-TROBA area drainage mat.
Read more

Schlüter®-BARA-RKL/-RKLT

Schlüter®-BARA-RKL/-RKLT

Schlüter®-BARA-RKL and Schlüter®-BARA-RKLT are angled edge profiles with drainage holes made of colour coated aluminium. They are especially suited for large format pavers, which are either installed loosely over gravel/crushed stone or pedestal constructions.
Read more

Schlüter®-BARA-RWL

Schlüter®-BARA-RWL

Schlüter®-BARA-RWL is an edging profile with drainage holes, made of colour coated aluminium for use on balconies and terraces. It is particularly suitable for finishing coverings on balconies and terraces that are set directly onto a gravel layer or pedestals.
Read more

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?