Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-LIPROTEC-LLPM /-LLP /-LLPE

Application and function

Schlüter-LIPROTEC-LLPM/-LLP/-LLPE are LED modules made from a flexible, encapsulated LED strip with homogeneous light distribution and an attachment profile made of aluminium or brushed stainless steel. The LED modules are available either with a fixed white-light colour temperature of 3000 K or 4900 K, or with a RGB+W colour range. The latter makes it possible to choose from more than 16 million hues and colour temperatures from 2500 K – 6500 K.

The support profiles make it possible to install the modules in a wide range of locations, with an installation height from 11 mm. Installation in walls, ceilings and shower areas is possible. In domestic indoor areas subject to light foot traffic, the Schlüter- LIPROTEC-LLPM LED modules in combination with white LED strips can be installed in the floor area. For use in surrounding areas of a pool, the Schlüter-LIPROTEC-LLPM LED module made of V4A stainless steel has to be used.

The LED modules are available as plug-andplay versions in different lengths. The LED strips can be shortened at the marked cutting points (WW / NW at distances of 25 mm, RGB+W at distances of 62.5 mm) and sealed in compliance with IP specifications by means of the included end cap sets. Depending on the light characteristics, the LED modules can be connected within a system, using cable connections and a splitter. Power supplies and the Bluetooth controller required for the RGB+W system are also designed as plug & play for ease of installation. Accessories such as profile end caps, cable connectors and hollow wall boxes that can be waterproofed are available.

Schlüter-LIPROTEC-LLPM
The LIPROTEC module using the Schlüter-DECO- SG profile made of anodised aluminium or brushed stainless steel (V4A) with a trapezoid-perforated anchoring leg makes it possible to create a line of light with the RGB+W colours as accent lighting. For areas surrounding a pool, the LIPROTEC-LLPM LED modules with a V4A stainless steel profile is needed.
The LED module with white light is available with an installation depth of 11 mm, and thus can be installed flush with tiles, even on floor areas. On the RGB+W version for walls and ceilings, the LED strip protrudes approx. 3 mm from the profile. (Also see product sheet 2.16 Schlüter-DECO- SG).

Suitable application areas:

  • Showers
  • Walls
  • Ceilings
  • Floors in bare-foot and low traffic areas e.g. domestic bathrooms.
  • Pool surrounds, not in underwater areas

Schlüter-LIPROTEC-LLP
The profile made of anodised aluminium has an installation depth of 17 mm and can be installed flush with the surface (see 15.5 Schlüter-LIPROTEC-LL product sheet). This makes linear accent lighting in the RGB+W colour range possible. For easy installation, a KERDI-BOARD-K mounting module is available. It is equipped with pre-milled grooves for fitting the profile or the LIPROTEC-ZKK cable ducts.

Suitable application areas:

  • Showers
  • Walls
  • Ceilings

Schlüter-LIPROTEC-LLPE
This LIPROTEC module can be installed in external or internal corners of rooms, as accent lighting. In shower areas, it should be installed vertically only. The Schlüter-LIPROTEC-LLE attachment profile consists of anodised or colour-coated aluminium (see product data sheet 15.7 Schlüter- LIPROTEC-LLE).

Suitable application areas:

  • Showers
  • Internal corners
  • External corners

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?