Large-scale tiles and natural stone pavers

installed safely with Schlüter-Systems

Large formats are trendy! Developers and architects following the new trend in interior and exterior designs increasingly request tile coverings with formats exceeding the conventional dimensions of 30 x 30 cm or 40 x 40 cm. However, larger tile dimensions also translate into a smaller number of joints in the tiled area and higher quality requirements for tile installations. Schlüter-Systems offers innovative system products for three different structural assemblies for damage-free coverings.

Loose installation on Schlüter®-TROBA in gravel/crushed stone beds

Loose installation of large-scale self-supporting pavers on gravel or crushed stone, drained with Schlüter®-TROBA
Read more

Loose installation over Schlüter®-TROBA-PLUS 8G

Loose installation over Schlüter®-TROBA-PLUS 8G using thin-bed mortar points with Schlüter®-TROBA-STELZ-DR
Read more

Schlüter®-DITRA-DRAIN as a bonded drainage and bonded uncoupling membrane over a Schlüter®-KERDI bonded waterproofing assembly

Structural assemblies with bonded drainage over bonded waterproofing assemblies
Read more

Profile cross sections

Schlüter®-BARA-RT

Schlüter®-BARA-RT is a T shaped finishing profile of colour coated aluminium for covering exposed edges of balconies and terraces. The top leg covers the edge of the assembly while the lower leg forms a drip edge and hides the joint with the Schlüter®-TROBA area drainage mat.
Read more

Schlüter®-BARA-RKL/-RKLT

Schlüter®-BARA-RKL and Schlüter®-BARA-RKLT are angled edge profiles with drainage holes made of colour coated aluminium. They are especially suited for large format pavers, which are either installed loosely over gravel/crushed stone or pedestal constructions.
Read more

Schlüter®-BARA-RWL

Schlüter®-BARA-RWL is an edging profile with drainage holes, made of colour coated aluminium for use on balconies and terraces. It is particularly suitable for finishing coverings on balconies and terraces that are set directly onto a gravel layer or pedestals.
Read more

Schlüter®-BARA-RTKE/-RTKEG

Schlüter®-BARA-RTKE is an edging profile with drip edge for floor assemblies that have an existing sloped screed. The profile features a T shaped chamber for attaching the Schlüter®-BARIN gutter system. Schlüter®-BARA-RTKE is especially suited for assemblies with the bonded drainage mat Schlüter®- DITRA-DRAIN. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Read more