Schlüter®-KERDI-SHOWER-T | Products | Schlüter-Systems
logo

Schlüter®-KERDI-SHOWER-T


Schlüter®-KERDI-SHOWER-T

Schlüter-KERDI-SHOWER-T is a sloped tray made of compression-resistant polystyrene with pre-adhered Schlüter-KERDI waterproofing. In showers, it creates a sufficient slope to a centre-installed point drain. It is designed to accommodate the floor drains Schlüter-KERDI-DRAIN. The sloped tray is installed on a flat, level, load bearing substrate and fitted to a prepared KERDI-DRAIN drain. Where necessary the trays can be cut to size with a utility knife, using the pre-marked cutting grooves on the underside of the tray, taking care to maintain a uniform gradient on all sides.

<a name='t'></a>Schlüter®-KERDI-SHOWER-T


Schlüter®-KERDI-SHOWER-TT

Schlüter-KERDI-SHOWER-TT is a sloped tray made of compression-resistant polystyrene with pre-adhered Schlüter-KERDI waterproofing. In showers, it creates a sufficient slope to a centre-installed or off-centre point drain. It is designed to accommodate the floor drains Schlüter-KERDI-DRAIN. The sloped tray is installed on a flat, level and load bearing substrate and fitted to a prepared KERDI-DRAIN drain. Where necessary the trays can be cut to size with a utility knife, using the pre-marked cutting grooves on the underside of the tray, taking care to maintain a uniform gradient on all sides.

<a name='tt'></a>Schlüter®-KERDI-SHOWER-TT


Schlüter®-KERDI-SHOWER-TT off-centre drainage


Schlüter®-KERDI-SHOWER-TS

Schlüter-KERDI-SHOWER-TS is a sloped tray made of compression-resistant polystyrene with pre-adhered Schlüter-KERDI waterproofing. In showers, it creates a sufficient slope to an off-centre point drain. It is designed to accommodate the floor drains Schlüter-KERDI-DRAIN. The sloped tray is installed on a flat, level, load bearing substrate and fitted to a prepared KERDI-DRAIN drain. Where necessary the trays can be cut to size with a utility knife, using the pre-marked cutting grooves on the underside of the tray, taking care to maintain a uniform gradient on all sides.

<a name='ts'></a>Schlüter®-KERDI-SHOWER-TS


Schlüter®-KERDI-SHOWER-SK /-SKB

Schlüter®-KERDI-SHOWER-SK is a waterproofing set for floor level showers. It includes Schlüter®-KERDI for waterproofing the wall areas of showers as well as the corresponding prefabricated parts for internal corners and pipe sleeves. The set also includes Schlüter®-KERDI-KEBA sealing band for waterproofing the abutting joints of the membranes and floorwall transitions and Schlüter®-KERDI-COLL sealing adhesive for waterproofing the sealing band and prefabricated parts.
The waterproofing set Schlüter®-KERDI-SHOWER-SKB also comes with a Schlüter®-KERDI-DRAIN-BASE floor drain. Schlüter®-KERDI-SHOWER-SK is suitable for conventional barrier free showers and for combination with the floor components Schlüter®-KERDI-SHOWER-T, -TC, -L, and -LC

<a name='sk'></a>Schlüter®-KERDI-SHOWER-SK /-SKB

Content of Schlüter®-KERDI-SHOWER-SK (KSS 5):

  • 1 x Schlüter®-KERDI-200, 1 m x 5 m
  • 2 x Schlüter®-KERDI-KERECK/FI
  • 1 x Schlüter®-KERDI-KEBA, 12,5 cm x 10 m
  • 1 x Schlüter®-KERDI-COLL, 1,85 kg
  • 2 x Schlüter®-KERDI-KM, Ø 150 mm

 

Content of Schlüter®-KERDI-SHOWER-SK (KSS 10):

  • 1 x Schlüter®-KERDI-200, 1 m x 10 m
  • 2 x Schlüter®-KERDI-KERECK/FI
  • 1 x Schlüter®-KERDI-KEBA, 12,5 cm x 12,5 m
  • 1 x Schlüter®-KERDI-COLL, 4,25 kg
  • 2 x Schlüter®-KERDI-KM, Ø 150 mm

Schlüter®-KERDI-SHOWER-SKB

Content of Schlüter®-KERDI-SHOWER-SKB (KSS 5 KD10 EH 40):

  • 1 x Schlüter®-KERDI-200, 1 m x 5 m
  • 2 x Schlüter®-KERDI-KERECK/FI
  • 1 x Schlüter®-KERDI-KEBA, 12,5 cm x 10 m
  • 1 x Schlüter®-KERDI-COLL, 1,85 kg
  • 2 x Schlüter®-KERDI-KM, Ø 150 mm
  • 1 x Schlüter®-KERDI-DRAIN-BASE set, consisting of: Floor drain set „KD BH 40“ and grate/frame set „KD R10 ED1 SGV“

 

Content of Schlüter®-KERDI-SHOWER-SKB (KSS 10 KD10 EH 40):

  • 1 x Schlüter®-KERDI-200, 1 m x 10 m
  • 2 x Schlüter®-KERDI-KERECK/FI
  • 1 x Schlüter®-KERDI-KEBA, 12,5 cm x 12,5 m
  • 1 x Schlüter®-KERDI-COLL, 4,25 kg
  • 2 x Schlüter®-KERDI-KM, Ø 150 mm
  • 1 x Schlüter®-KERDI-DRAIN-BASE set, consisting of: Floor drain set „KD BH 40“ and grate/frame set „KD R10 ED1 SGV“

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit