Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-KERDI-DRAIN

Exterior areas

Can I use the floor drains in exterior areas?

Show answer

Floor drains without odour traps can be used without restriction in exterior areas. If the floor drain has an odour trap, it must be removed for installation in exterior areas. Schlüter-Systems is the only manufacturer to offer an odour trap that is part of the grate-frame assembly and is therefore removable.

Drainage capacity

What are the drainage capacities of assemblies created with Schlüter®-KERDI-DRAIN or Schlüter®-KERDI-LINE?

Show answer

  • Schlüter®-KERDI-LINE-H DN 40: 0.5 l/s
  • Schlüter®-KERDI-LINE-H DN 50: 0.6 l/s
  • Schlüter®-KERDI-LINE-V GSE: 1.0 l/s
  • Schlüter®-KERDI-LINE V GE: 0.8 l/s
  • Schlüter®-KERDI-DRAIN DN 40 horizontal, and odour trap: 0.4 l/s
  • Schlüter®-KERDI-DRAIN DN 50 horizontal, with odour trap: 0.6 l/s
  • Schlüter®-KERDI-DRAIN DN 50/70 horizontal, with odour trap: 0.8 l/s
  • Schlüter®-KERDI-DRAIN DN 50 horizontal, without odour trap (for exterior applications): 1.4 l/s
  • Schlüter®-KERDI-DRAIN DN 50 vertical, with odour trap / with substructure: 0.6 l/s / 0.8 l/s
  • Schlüter®-KERDI-DRAIN DN 50 vertical, without odour trap: 1.4 l/s

Floor coating

Can I use your drainage systems with floor coatings that have low assembly heights?

Show answer

Technically, a linear drainage system requires an assembly height of at least 5 mm. With our point drainages, the grate unit can be installed flush with the floor.

Other waterproofing systems

Can I connect to other waterproofing systems?

Show answer

In principle, you can work with other waterproofing systems (e.g. troweled waterproofing solutions), but they may not contain any solvents.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit