Schlüter®-JOLLY | Function | Schlüter-Systems
logo

Schlüter®-JOLLY

Application and Function

Schlüter-JOLLY is a finishing profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.

Other applications include dado coverings and transitions for coverings such as carpet, natural stone, or epoxy resin coverings for wall areas.

In addition to the profile’s decorative effect, the tiles are protected against damage caused by mechanical stresses along the edges. The integrated joint spacer forms a defined joint cavity with the tile.


Schlüter®-JOLLY

Installation

  1. Select Schlüter-JOLLY according to tile thickness.
  2. Apply tile adhesive to the area where the tile covering will end, using a notched trowel. If Schlüter-JOLLY is to be installed in wall corners, complete the tiling of one wall, then apply tile adhesive in the corner area of the second wall.
  3. Press the perforated anchoring leg of the Schlüter-JOLLY into the tile adhesive and align.
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
  5. Firmly press the adjoining tiles into place and adjust them in such a way that the upper lip of the profile is flush with the tile. Ensure full coverage when setting tiles in the profile area.
  6. The tile is set to the lateral joint spacer, which ensures a uniform joint of 1.5 mm. With the stainless steel profiles, leave a space of approximately 1.5 mm.
  7. Fill the joint completely with grout.
  8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially on aluminium.

Schlüter®-JOLLY

Material

Schlüter®-JOLLY is available in the following materials and finishes:

  • MC = chrome plated brass
  • ACG = polished chrome anodised aluminium
  • ACGB = brushed chrome anodised aluminium
  • AT = matt titanium anodised aluminium
  • ATG = polished titanium anodised aluminium
  • ATGB = brushed titanium anodised aluminium
  • AK = matt copper/bronze anodised aluminium
  • AKG = polished copper/bronze anodised aluminium
  • AKGB = brushed opper/bronze anodised aluminium
  • AM = matt brass anodised aluminium
  • AMG = polished brass anodised aluminium
  • AMGB = brushed brass anodised aluminium
  • ABGB = brushed antique bronze anodised aluminium
  • AGSG = bright black anodised aluminium
  • AGRB = brushed graphite anodised aluminium
  • TS = textured finished aluminium
  • AC = colour coated aluminium
  • P = coloured PVC

Note: Profiles in brass, aluminium, anodised aluminium and stainless steel are included in the Schlüter®-SCHIENE range.

 

Material properties and areas of application

In certain cases, the suitability of a proposed type of profile must be verified, based on anticipated chemical, mechanical and/or other stresses.

Schlüter-JOLLY-MC (chrome plated solid brass) is a finishing profile that is especially well suited for wall corners and transitions. It is ideal for matching chrome fixtures. Surface areas must be protected against abrasion or scratching. Remove all adhesive and grouting material immediately.

Schlüter-JOLLY-AC (colour coated aluminium): The aluminium is pretreated (chromated), then colour coated with a polyurethane powder coat. The coating is colour stable, UV resistant, and suitable for exterior use. Protect the profile against abrasion or scratching.

The surfaces of Schlüter-JOLLY-TS profiles (textured finished aluminium) have a natural appearance (see Schlüter-JOLLY-AC for further properties).

Schlüter-JOLLY-ACG / -ACGB / -AT / -ATG / -ATGB / -AK / -AKG / -AKGB / -AM / -AMG / -AMGB / - ABGB / -AGSG / -AGRB (anodised aluminium):

The aluminium features a surface refined by an anodised layer that does not alter during normal use. Surface areas must be protected against abrasion or scratching. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminium is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and penetration time) may result in corrosion (aluminium hydroxide formation). For this reason, remove adhesive or grouting material immediately from all visible areas and do not cover freshly installed coverings until adhesive and grout have dried. In addition, ensure that the profile is solidly embedded in the setting material to prevent alkaline water from accumulating in small cavities. Schlüter-JOLLY-P (coloured PVC) is made of precoloured, rigid PVC which resists bending or scratching. The material is UV resistant, although it is not permanently colour stable in exterior applications. It is not suited for corners or transitions sub- jected to heavy mechanical loads, e.g. at step edges or floor transitions.

Schlüter-SCHIENE-M / -A / -AE / -E:

Refer to the various finishes and materials for Schlüter-SCHIENE which can be used in similar applications as the Schlüter-JOLLY.


Schlüter®-JOLLY

Maintenance

Schlüter®-JOLLY does not require any special maintenance. Do not use abrasive cleaning agents on sensitive areas. Damaged anodised surfaces can be restored with paint.


Schlüter®-JOLLY


Schlüter®-JOLLY<a name='jolly'></a>

Schlüter®-JOLLY-P are decorative profiles made of coloured PVC to finish and protect tiled external wall corners and other tiled edges, e.g. tiled skirting. The integrated spacer creates a channel for grouting the tile.

Schlüter®-JOLLY<a name='jolly'></a>


Schlüter®-JOLLY-ACGB


Schlüter®-JOLLY-AM


Schlüter®-JOLLY-AMG


Schlüter®-JOLLY-AMGB


Schlüter®-JOLLY-AK


Schlüter®-JOLLY-AKG


Schlüter®-JOLLY-AKGB


Schlüter®-JOLLY-AT


Schlüter®-JOLLY-ATG


Schlüter®-JOLLY-ATGB


Schlüter®-JOLLY-ABGB


Schlüter®-JOLLY-AGRB


Schlüter®-JOLLY-AGSG


Schlüter®-JOLLY-MC


Schlüter®-JOLLY-AC

To complete the Art.-No., add the colour (e.g. A 30 BW)

* Colours L = 2.50 m:
BH - bahama, no RAL
BW - brilliant white, RAL 9003
G - grey, RAL 7030
GM - grey metallic, RAL 9006
GS - black, RAL 9011
HB - light beige, RAL 1019
HG - light grey, RAL 7035
MBW - satin brilliant white, RAL 9003
MGS - matt graphite black, RAL 9005
PG - pastel grey, no RAL
RB - red brown, RAL 8003
SB - black brown, RAL 8019
W - white, RAL 9010

Colours L = 3.00 m:
BW - brilliant white, RAL 9003
GS - black, RAL 9011
MBW - satin brilliant white, RAL 9003
PG - pastel grey, no RAL
W - white, RAL 9010

For 3 metre length, add “/300” to art. no. (e.g. A 60 ACG/300).


Schlüter®-SCHIENE-AE

Schlüter®-SCHIENE-AE


Schlüter®-SCHIENE-EB

Schlüter®-SCHIENE-EB


Schlüter®-JOLLY-P<a name='p'></a>

Schlüter®-JOLLY-P are decorative profiles made of coloured PVC to finish and protect tiled external wall corners and other tiled edges, e.g. tiled skirting. The integrated spacer creates a channel for grouting the tile.

Schlüter®-JOLLY-P<a name='p'></a>

to complete the Art.-No. 45, add the colour (e.g. BW 45) 

* Colours for Art.-No. ... 45:
BW - brilliant white, RAL 9003
HG - light grey, RAL 7035
W - white, RAL 9010

** Colours for Art.-No. ... 60, ... 80, ... 100:
BH - bahama, no RAL
BW - brilliant white, RAL 9003
GS - black, RAL 9011
HG - light grey, RAL 7035
PG - pastel grey, no RAL
SP - soft peach, no RAL
W - white, RAL 9010

*** Colours for Art.-No. ... 125:
BW - brilliant white, RAL 9003
HG - light grey, RAL 7035
PG - pastel grey, no RAL
W - white, RAL 9010


Schlüter®-JOLLY-TS<a name='ts'></a>

Schlüter®-JOLLY-TS is a decorative aluminium profile with a special coating structure and texture for external wall corners of tile coverings and finished edges of skirtings and coverings, which protects the edges of tiles from mechanical damage. The joint spacer defines a joint chamber with the tile.

Schlüter®-JOLLY-TS<a name='ts'></a>


Schlüter®-JOLLY-TSC


Schlüter®-JOLLY-TSBG


Schlüter®-JOLLY-TSB


Schlüter®-JOLLY-TSSG


Schlüter®-JOLLY-TSG


Schlüter®-JOLLY-TSOB


Schlüter®-JOLLY-TSLA


Schlüter®-JOLLY-TSDA


Schlüter®-JOLLY-TSR


Schlüter®-JOLLY


Schlüter®-JOLLY

Videos

Enjoy our videos showing the product itself as well as possible areas of application.


Balcony assembly: Loose installation of natural stone on mortar casting mould rings with drainage




Gutter system for balconies and terraces: Schlüter®-BARIN




Balcony assembly: Loose installation of natural stone on mortar casting mould rings with drainage




Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit  


Schlüter® profiles with radius perforations
Schlüter® profiles with radius perforations

Schlüter®-RUMA
Schlüter®-RUMA

Bending machine for profiles with radius perforations.