Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo

Schlüter®-JOLLY

Material

Schlüter®-JOLLY is available in the following materials and finishes:

  • MC = Chrome plated solid brass
  • ACG = Polished chrome anodised aluminium
  • AMG = Polished brass anodised aluminium
  • TS = textured finished aluminium
  • AC = Colour coated aluminium
  • P = Coloured PVC

Note: Profiles in brass, aluminium, anodised aluminium and stainless steel are included in the Schlüter®-SCHIENE range. 

 

Material properties and areas of application

In special cases, the suitability of a proposed type of profile must be verified, based on anticipated chemical, mechanical and/or other stresses.

Schlüter®-JOLLY-MC (chrome plated solid brass)
is a finishing profile that is especially well suited for wall corners and transitions. It is ideal for matching chrome fixtures.
Surface areas must be protected against abrasion or scratching. Remove all mortar and grouting material immediately.

Schlüter®-JOLLY-AC (colour coated aluminium):
The aluminium is pretreated (chromated), then colour coated with a polyurethane powder coat. The coating is colour stable, UV resistant, and suitable for exterior use. Protect the profile against abrasion or scratching.

The surfaces of Schlüter®-JOLLY-TS profiles (textured finished aluminium) have a natural appearance (see Schlüter®-JOLLY-AC for further properties).

Schlüter®-JOLLY-ACG / -AMG (anodised aluminium):
The aluminium features a surface refined by an anodised layer that does not alter during normal use. Surface areas must be protected against abrasion or scratching. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminium is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and penetration time) may result in corrosion (aluminium hydroxide formation). For this reason, remove mortar or grouting material immediately from all visible areas and do not cover freshly installed coverings until adhesive and grout have dried. In addition, ensure that the profile is solidly embedded in the setting material to prevent alkaline water from accumulating in small cavities.

Schlüter®-JOLLY-P (coloured PVC) is made of precoloured, rigid PVC which resists bending or scratching. The material is UV resistant, although it is not permanently colour stable in exterior applications. It is not suited for corners or transitions subjected to heavy mechanical loads, e.g. at step edges or floor transitions.

Schlüter®-SCHIENE-M / -A / -AE / -E: Refer to the various finishes and materials for Schlüter®-SCHIENE which can be used in similar applications as the Schlüter®-JOLLY.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces

Metal surfaces

All surfaces at a glance

Schlüter colour key

Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit  


Schlüter® profiles with radius perforations

Schlüter® profiles with radius perforations

Schlüter®-RUMA

Schlüter®-RUMA

Bending machine for profiles with radius perforations.