Heating pipes, distributors & connectors

Schlüter®-BEKOTEC-THERM-HR

Schlüter®- BEKOTEC-THERM-HR is a heating pipe of high-quality PE-RT plastic. It is very flexible and allows for optimal installation in the Schlüter®- BEKOTEC studded screed panel. Diameters 10, 12, 14 or 16 mm, manufactured according to DIN 16833, oxygen-impermeable according to DIN 4721/26, SKZ quality-control A220.
Read more

Schlüter®-BEKOTEC-THERM-ZW

Schlüter®- BEKOTEC-THERM-ZW is an angle clip of synthetic material for defined 90° bends of the heating pipes Ø 10, 12, 14 or 16 mm in the distributor cabinet. The angle clip is easy to attach to the heating pipes from the side. Due to the relatively low thickness of the screed layer, the use of the clips is recommended.
Read more

Schlüter®-BEKOTEC-THERM-HERO

Schlüter-BEKOTEC-THERM-HERO ist eine Abrollvorrichtung für alle BEKOTEC-THERM Heizrohre. Sie ist universal für alle Längen und Durchmesser einsetzbar. Außerdem wird jede Abrollvorrichtung benutzerfreundlich für einen komfortablen und sicheren Transport mit einer Tragetasche ausgeliefert.
Read more

Schlüter®-BEKOTEC-THERM-RH

Schlüter®-BEKOTEC-THERM-RH 75 is an attachment clamp for the heating pipes, which can be anchored into the Schlüter®-BEKOTEC studded panels across the studs. It is especially useful for forming 45° angles with 16 mm heating pipes in the studded panel. Schlüter®-BEKOTEC-THERM-RH 17 is a plastic clip with barbs for anchoring 16 mm heating pipes into the Schlüter®-BEKOTEC studded panels.
Read more

Schlüter®-BEKOTEC-THERM-HVT/DE /-HV/AS

Schlüter-BEKOTEC-THERM-HVT/DE is a heating circuit distributor DN 25 of stainless steel with hot leg and cold leg bars, outside diameter 35 mm.
Read more

Schlüter®-BEKOTEC-THERM-HVP

Schlüter-BEKOTEC-THERM-HVP is is a heating circuit distributor made of fibreglass-reinforced plastic. Each heating circuit distributor comprises a connection set and 1 to 12 hot leg and cold leg modules as well as installation brackets.
Read more

Schlüter®-BEKOTEC-THERM-HVE

Schlüter®- BEKOTEC-THERM-HVE is a heating circuit distributor manifold expansion for the subsequent expansion of the Schlüter heating circuit distributor of stainless steel.
Read more

Schlüter®-BEKOTEC-THERM-KH

Schlüter®-BEKOTEC-THERM-KH is a ball valve made of nickel plated brass, with 1" outside threading on one side (DN 25) for flat gasket connection to Schlüter heating circuit distributors and a connection pipe with 3/4" (DN 20) or 1" (DN 25) inside threading (shipping unit = set of two units for hot leg and cold leg).
Read more

Schlüter®-BEKOTEC-THERM-KV

Schlüter-BEKOTEC-THERM-KV is a clamp connection set for the hot and cold leg 3/4" (DN 20) made of nickel plated brass for connecting the Schlüter heating pipes, diameter 10. 12. 14 or 16 mm, to the Schlüter heating circuit distributor.
Read more

Schlüter®-BEKOTEC-THERM-KU

Schlüter®- BEKOTEC-THERM-KU is a 3/4" (DN 20) connection coupling made of nickel plated brass for the connection of Schlüter heating pipes, diameter 12, 14 or 16 mm.
Read more

Schlüter®-BEKOTEC-THERM-KUS

Schlüter®-BEKOTEC-THERM-KUS is a 3/8" (DN 10) connection coupling made of nickel plated brass for the connection of Schlüter heating pipes, diameter 10 mm.
Read more

Schlüter®-BEKOTEC-THERM-AN

Schlüter®- BEKOTEC-THERM-AN is a 1/2" x 3/4" connector fitting made of nickel plated brass. One side has a self sealing 1/2" (DN 15) external thread, while the other side features a 3/4" (DN 20) compression fitting for connecting the 14 mm or 16 mm Schlüter heating pipe.
Read more

Schlüter®-BEKOTEC-THERM-AW

Schlüter®-BEKOTEC-THERM-AW is a 1/2" x 3/4" angled connection fitting made of nickel plated brass that can be rotated. One side has a self sealing 1/2" (DN 15) external thread, while the other side features a 3/4" (DN 20) compression fitting for connecting the 14 mm or 16 mm Schlüter heating pipe.
Read more

Schlüter®-BEKOTEC-THERM-DA

Schlüter®-BEKOTEC- THERM-DA is a set of twin connectors made of nickel plated brass. It features a 3/4'' (DN 20) cone joint nut on one side and two 3/4'' (DN 20) cone connector threads on the other side for connecting the Schlüter heating pipes with diameters of 12 mm, 14 mm or 16 mm.
Read more

Schlüter®-BEKOTEC-THERM-S35

Schlüter®-BEKOTEC-THERM-S35 is an offset connector made of nickel-plated brass, featuring a 3/4" (DN 20) cone joint nut on one side and a 3/4" (DN 20) cone connector nozzle on the other side for connecting Schlüter heating pipes with diameters of 10, 12, 14, or 16 mm.
Read more

Schlüter®-BEKOTEC-THERM-PW

Schlüter®-BEKOTEC-THERM-PW is a blank set for retrofitting the calorimeter, partly pre-installed.
Read more

Schlüter®-BEKOTEC-THERM-ZV

Schlüter®- BEKOTEC-THERM-ZV is a heating zone valve that simultaneously operates all heating circuits connected to the Schlüter®- BEKOTEC heating circuit distributor by opening or closing. The heating zone valve can be controlled by a Schlüter actuator. The unit is controlled either by Schlüter control components or through an external control unit. Connection/material: threaded connection/valve 1" (DN!25) of nickel plated brass.
Read more

Schlüter®-BEKOTEC-THERM-FRS

Schlüter-BEKOTEC-THERM-FRS is a fixed-value control station for setting the supply temperature. It enables the installation of a heating circuit distributor (stainless steel or plastic) with 1 to 12 heating circuits.
Read more

Schlüter®-BEKOTEC-THERM-RTB

Schlüter®-BEKOTEC-THERM-RTB is a return temperature limiter valve for concealed installation into the wall. It is installed at the end of a Schlüter®- BEKOTEC-THERM heating circuit and can be utilised to limit the water temperature in the preceding heating circuit. In addition, it serves to control the floor temperature in rooms with existing heaters. The temperature limiter can be adjusted to temperatures ranging from 20° to 40 ºC.
Read more

Schlüter®-BEKOTEC-THERM-RTBR

Schlüter-BEKOTEC-THERM-RTBR is a room temperature control valve with integrated return temperature limit valve for on-wall mounting in connection with BEKOTEC-THERM surface heating systems.
Read more

Schlüter®-BEKOTEC-THERM-RTBES

Das Set Schlüter-BEKOTEC-THERM-RTBES mit Rücklauftemperatur-Begrenzer und elektronischem Thermostat beinhaltet alles, was Sie für eine effiziente Raumtemperaturregelung benötigen.
Read more

Schlüter®-BEKOTEC-THERM-VSE

Schlüter®- BEKOTEC-THERM-VSE is a distributor cabinet for concealed mounting to house the Schlüter heating circuit distributor manifold and the matching control components. The concealed cabinet consists of galvanised steel with two stabilising double edges around the perimeter and perforations in the lateral walls for inserting the connector pipes.
Read more

Schlüter®-BEKOTEC-THERM-VSV

Schlüter®- BEKOTEC-THERM-VSV is a distributor cabinet for surface mounting to house the Schlüter heating circuit distributor manifold and the matching control components. The distributor cabinet consists of galvanised steel with powder coating on the inside and outside.
Read more

Connection components for Schlüter®-BEKOTEC-EN P/PF

Our connection package includes all products required for connecting Schlüter-BEKOTEC-THERM heating circuits to the heating system. In addition to a stainless steel distributor with temperature gauge, it includes clamping rings, angle clips and actuators. Everything you need ready for installation on site in a single, waste-optimised package.
Read more

Connection components for Schlüter®-BEKOTEC-EN F

Our connection package includes all products required for connecting Schlüter-BEKOTEC-THERM heating circuits to the heating system. In addition to a stainless steel distributor with temperature gauge, it includes clamping rings, angle clips and actuators. Everything you need ready for installation on site in a single, waste-optimised package.
Read more

Connection components for Schlüter®-BEKOTEC-EN FTS

Our connection package includes all products required for connecting Schlüter-BEKOTEC-THERM heating circuits to the heating system. In addition to a stainless steel distributor with temperature gauge, it includes clamping rings, angle clips and actuators. Everything you need ready for installation on site in a single, waste-optimised package.
Read more

Connection components for Schlüter®-BEKOTEC-EN FK

Our connection package includes all products required for connecting Schlüter-BEKOTEC-THERM heating circuits to the heating system. In addition to a stainless steel distributor with temperature gauge, it includes clamping rings, angle clips and actuators. Everything you need ready for installation on site in a single, waste-optimised package.
Read more

Renovation set for Schlüter®-BEKOTEC-EN F

Our BEKOTEC renovation set includes 13 m² of our EN 23 F system panel, the matching system heating pipe in a diameter of 14 mm (70 m), 2 clamping rings and a return temperature limiter with a white plastic cover.
Read more

Renovation set for Schlüter®-BEKOTEC-EN FK

Our BEKOTEC renovation set includes 8 m² of our EN 12 FK system panel, the matching system heating pipe in a diameter of 10 mm (50 m), 2 clamping rings and a return temperature limiter with a white plastic cover.
Read more