Schlüter®-ECK-K /-KHK /-KI | Installation | Schlüter-Systems

Schlüter®-ECK-K /-KHK /-KI


  1. Schlüter®-ECK-K /-KHK /-KI profiles are adhered to fully tiled wall corners with the installation adhesive Schlüter®-KERDI-FIX or an equivalent material. Apply one line of adhesive to the back of the profile’s anchoring legs and then press it onto the edge or corner or the covering in such a way that the lateral edges are fully attached. Prior to applying the installation adhesive, remove all substances that may weaken the bond (e.g. grease, etc.) from the attachment areas.
  2. Use a suitable detergent to remove all excess adhesive squeezed out from below the profile’s anchoring legs. 
  3. Remove the protective foil.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit