Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to receive all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time. Further information

logo

Schlüter®-DITRA-HEAT


Schlüter®-DITRA-HEAT

Schlüter®-DITRA-HEAT is a polypropylene membrane with a cut back stud structure and an anchoring fleece laminated on the underside. It is a universal substrate for tile coverings, which serves as an uncoupling layer and moisture vapour barrier and is designed for the attachment of the matching heating cables of the system for floor heating.

<a name='heat'></a>Schlüter®-DITRA-HEAT


Schlüter®-DITRA-HEAT-MA

Pack = 10 St.

Schlüter®-DITRA-HEAT-DUO

Schlüter®-DITRA-HEAT-DUO is a polypropylene membrane with a cut back stud structure and a special, 2 mm anchoring fleece laminated on the underside. It is a universal substrate for tile coverings, which serves as a bonded waterproofing, uncoupling, crack bridging, and vapour pressure equalisation layer and is designed for the attachment of the matching system heating cables for floor and wall heating.

The special thermal barrier fleece, in addition to reducing impact sound, enables faster heating of floor and wall coverings.

<a name='tb'></a>Schlüter®-DITRA-HEAT-DUO


Schlüter®-DITRA-HEAT-DUO


Schlüter®-DITRA-HEAT-E-R

Schlüter®-DITRA-HEAT-E-R is a thermostat with a 2" (5.1 cm) touchscreen display for the time-controlled regulation of electrically heated floor and wall coverings with Schlüter®-DITRA-HEAT-E. The device can either be used exclusively to set the covering temperature or for temperature control with room air adjustment. A spare sensor is included in the scope of supply.

<a name='er'></a>Schlüter®-DITRA-HEAT-E-R

Note:
If the remote sensor is installed directly in the Schlüter®-DITRA-HEAT uncoupling mat, the spare sensor included in the scope of supply has to be installed as well.


Schlüter®-DITRA-HEAT-E-R3

Schlüter®-DITRA-HEAT-E-R3 is a thermostat with a 3.5” (8.9 cm) touchscreen display for the time-controlled regulation of electrically heated floor and wall coverings with Schlüter®-DITRA-HEAT-E. The thermostat features include temperature readings from the floor covering and air readings. A spare sensor is included as standard.

Schlüter®-DITRA-HEAT-E-R3

Note:
If the remote sensor is installed directly in the Schlüter®-DITRA-HEAT uncoupling mat, the spare sensor has to be installed as well.


Schlüter®-DITRA-HEAT-E-R4

Schlüter®-DITRA-HEAT-E-R4 is an analogue thermostat for the electrical temperature regulation of wall and floor coverings with Schlüter®-DITRA-HEAT-E. The user-friendly thermostat has an on/off switch and a dial for setting the temperature set-point. A spare sensor is included as standard.

Schlüter®-DITRA-HEAT-E-R4

Note:
If the remote sensor is installed directly in the Schlüter®-DITRA-HEAT uncoupling mat, the spare sensor has to be installed as well.


Schlüter®-DITRA-HEAT-E-R-WIFI

Schlüter®-DITRA-HEAT-E-R-WIFI is a smart thermostat for full control of the electrical heating of floor and wall coverings with Schlüter®-DITRA-HEAT-E. It can be operated via the 2" (5,1 cm) touchscreen display or remotely using a smartphone or tablet with the dedicated Schlüter®-HEAT-CONTROL app. The smart thermostat can either be used exclusively to set the covering temperature or for temperature control with room air adjustment. A spare sensor is included in the scope of supply.

Schlüter®-DITRA-HEAT-E-R-WIFI


Schlüter®-DITRA-HEAT-E-CT

Schlüter®-DITRA-HEAT-E-CT is a test device for measuring and checking the resistance of the electrical heating cables Schlüter®-DITRA-HEAT-E-HK and the remote sensors supplied with Schlüter®-DITRA-HEAT-E thermostats. The device monitors the resistance of the heating cables during the entire installation phase and alerts the installer with an acoustic signal in the event of damage.

<a name='ct'></a>Schlüter®-DITRA-HEAT-E-CT


Schlüter®-DITRA-HEAT-E-HK

Schlüter®-DITRA-HEAT-E-HK is an electrical heating cable with a unilateral connection for installation in the uncoupling mat Schlüter®- DITRA-HEAT.

<a name='hk'></a>Schlüter®-DITRA-HEAT-E-HK

* For use in floor and wall areas!
** For use in wall areas only!

Note:
Heating cables must not be shortened. When selecting the heating cable, please note that the table with the heated space in m² does not specify the room size. To determine the heated space, deduct unheated zones such as perimeter areas and storage space from the room size.

New cable lengths available!


Schlüter®-DITRA-HEAT-E-ZS

Schlüter®-DITRA-HEAT-E-ZS is an installation set comprising a conduit (2.5 m), junction box, and sensor sleeve. It can be used if the installation of the remote sensor in the conduit is preferred.

Schlüter®-DITRA-HEAT-E-ZS


Complete sets Schlüter®-DITRA-HEAT-E


Schlüter®-DITRA-HEAT-E-S

Schlüter®-DITRA-HEAT-E-S1/S2/S3 are complete sets for electrical heating of floor and wall coverings. They contain the uncoupling mats Schlüter®-DITRA-HEAT-MA, the heating cables Schlüter®-DITRA-HEAT-E-HK, and the touchscreen thermostat Schlüter®-DITRA-HEAT-E-R or the WiFi touchscreen thermostat Schlüter®-DITRA-HEAT-ER-WIFI. If necessary, the uncoupled area can be expanded with additional Schlüter®-DITRA-HEAT membranes.

Schlüter®-DITRA-HEAT-E-S

* For use in floor and wall areas
** For use in wall areas only

All sets include:

  • Schlüter®-DITRA-HEAT-MA uncoupling mats; see table
  • Heating cable Schlüter®-DITRA-HEAT-E-HK; see table (installation around every 3rd stud ≙ 136 W/m² / installation around every 2nd stud ≙ 200 W/m²)
  • 1 Schlüter®-DITRA-HEAT-E-R touchscreen thermostat or WiFi touchscreen thermostat
  • 2 x junction boxes
  • 1 x conduit (3 m)

Schlüter®-DITRA-HEAT-E-S1/S2/S3 WiFi

* For use in floor and wall areas
** For use in wall areas only


Schlüter®-DITRA-HEAT-E-DUO-S

Schlüter®-DITRA-HEAT-E-DUO-S are complete sets for electrical heating of floor and wall coverings. They contain the uncoupling mats Schlüter®-DITRA-HEAT-DUO-MA (0.8 x 1 m), the heating cables Schlüter®-DITRA-HEAT-E-HK, and the touchscreen thermostat Schlüter®-DITRA-HEAT-E-R or the WiFi touchscreen thermostat Schlüter®-DITRA-HEAT- E-R-WIFI. Thanks to its special anchoring fleece, the uncoupling mat not only reduces impact sound, but also facilitates a quicker heat-up response. If necessary, the uncoupled area can be expanded with additional Schlüter®-DITRA-HEAT-DUO membranes.

Schlüter®-DITRA-HEAT-E-DUO-S

* For use in floor and wall areas
** For use in wall areas only

All sets include:

  • Schlüter®-DITRA-HEAT-DUO-MA uncoupling mats; see table
  • Heating cable Schlüter®-DITRA-HEAT-E-HK; see table (installation around every 3rd stud ≙ 136 W/m² / installation around every 2nd stud ≙ 200 W/m²)
  • 1 Schlüter®-DITRA-HEAT-E-R touchscreen thermostat or WiFi touchscreen thermostat
  • 2 x junction boxes
  • 1 x conduit (3 m)

Schlüter®-DITRA-HEAT-E-DUO-S WiFi

* For use in floor and wall areas
** For use in wall areas only


Schlüter®-DITRA-HEAT-E-WS

Schlüter®-DITRA-HEAT-E-WS1/-WS2 are complete sets for electrical heating of wall coverings. They contain the uncoupling mats Schlüter®-DITRA-HEAT-MA, the heating cables Schlüter®-DITRA-HEAT-E-HK, and the touchscreen thermostat Schlüter®-DITRA-HEAT-E-R or the WiFi touchscreen thermostat Schlüter®-DITRA-HEATE-R-WIFI. If necessary, the uncoupled area can be expanded with additional Schlüter®-DITRA-HEAT membranes.

Schlüter®-DITRA-HEAT-E-WS

All sets include:

  • Schlüter®-DITRA-HEAT-MA uncoupling mats; see table
  • Heating cable Schlüter®-DITRA-HEAT-E-HK; see table (installation around every 2nd stud ≙ 200 W/m²)
  • 1 Schlüter®-DITRA-HEAT-E-R touchscreen thermostat or WiFi touchscreen thermostat
  • 2 x junction boxes
  • 1 x conduit (3 m)

Schlüter®-DITRA-HEAT-E-WS1/WS2 WiFi


Schlüter®-DITRA-HEAT-E-DUO-WS

Schlüter®-DITRA-HEAT-E-DUO-WS10/-WS11 are complete sets for electrical heating of wall coverings. They contain the uncoupling mats Schlüter®-DITRA-HEAT-DUO-MA (0.8 x 1 m), the heating cables Schlüter®-DITRA-HEAT-E-HK, and the touchscreen thermostat Schlüter®-DITRA-HEAT-E-R or the WiFi touchscreen thermostat Schlüter®-DITRA-HEAT-E-R-WIFI. Thanks to its special anchoring fleece, the uncoupling mat facilitates a quicker heat-up response. If necessary, the uncoupled area can be expanded with additional Schlüter®-DITRA-HEAT-DUO membranes.

Schlüter®-DITRA-HEAT-E-DUO-WS

All sets include:

  • Schlüter®-DITRA-HEAT-MA uncoupling mats; see table
  • Heating cable Schlüter®-DITRA-HEAT-E-HK; see table (installation around every 2nd stud ≙ 200 W/m²)
  • 1 Schlüter®-DITRA-HEAT-E-R touchscreen thermostat or WiFi touchscreen thermostat
  • 2 x junction boxes 
  • 1 x conduit (3 m)

Schlüter®-DITRA-HEAT-E-DUO-WS WiFi


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit