Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-DILEX-MP

Installation

  1. Adjust profile according to design height by attaching snap-on extensions (Schlüter®-DILEX-MPV). 
  2. Set profile flush against the edge area of an already completed tile covering. The profile must be solidly embedded laterally. 
  3. Install surface of adjacent tile covering flush against profile surface. Schlüter®- DILEX-MP must be solidly embedded laterally. 
  4. Fill the remaining joint between the profile and the covering completely with grout.

 

Installation note on joint repair: Prepare the joint’s width and depth appropriately and insert or drive profile into joint. Fill joint space between profile and covering completely with grout, epoxy or dry set mortar.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit