Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-DILEX-HKS/-EHK

Installation

  1. Select Schlüter®-DILEX-HKS or Schlüter®- DILEX-EHK according to the tile thickness. 
  2. Apply tile adhesive to the area where the profile is to be installed, using a notched trowel. 
  3. Press the trapezoid perforated anchoring legs of Schlüter®-DILEX-HKS or Schlüter®-DILEX-EHK securely into the adhesive and align. 
  4. Place additional adhesive over the trapezoid perforated anchoring leg to ensure full coverage. Trowel tile adhesive against the vertical anchoring leg at an angle. 
  5. Profile joints and internal and external corners are covered with the appropriate spe- cial pieces and adhered using a permanently elastic, waterproof adhesive. Prior to the application, any substances which may inhibit bonding, such as grease, etc have to be removed. The special pieces should overlap the profiles by at least 10 mm. 
  6. The tiles adjoining the profile must be solidly embedded into the adhesive bed. 
  7. A joint of approximately 2 mm should be left between the tile and the profile. Fill the joint completely with grout. 

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit