Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-DILEX-HK

Installation

  1. Adhere the trapezoid perforated anchoring legs of Schlüter®-DILEX-HK at the wall and floor and firmly press them into the adhesive bed.
  2. When setting tiles, trowel tile adhesive onto the substrate and over the perforated anchoring legs to ensure full coverage.
  3. A joint of approx. 2 mm - 3 mm should be left between the wall tile and the profile. Fill the joint completely with grout.
  4. Insert floor tile into the channel beneath the edge of the cove, and completely fill the remaining joints with grout or adhesive. If necessary, fill the channel of the profile with adhesive prior to setting tiles.


Note: Inserting a floor tile into the channel of the profile results in a small edge at the transition point of the cove. To avoid this, fill the channel with mortar prior to setting the tiles, so that the tiles may be set flush to the filled channel.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit