Schlüter®-DILEX-EZ 70 | Schlüter-Systems

Schlüter®-DILEX-EZ 70

Application and Function

Schlüter®-DILEX-EZ 70, a profile made of rigid and soft PVC, is used for creating movement joints in coverings set in a screed bed, e.g. pavers, ceramic tiles, and natural or man-made stone. The 70 mm high profile features detachable tubes to accommodate the thickness of the mortar bed and tile surface.

To avoid uncontrolled cracking, the mortar bed and covering are divided into fields by installing Schlüter®-DILEX-EZ 70. The movement zone, made of soft PVC, absorbs compressive stresses due to expansion of the mortar bed.

 Tensile stresses that may occur cannot be absorbed, since the profile does not have lateral frictional anchoring in the mortar bed.

The side sections of the profile are made of rigid PVC and protect the edges of the adjacent covering from mechanical stresses caused by industrial traffic. However, limitations of the PVC as edge protection able to withstand mechanical stresses must be considered. In addition to grey, the profile is also available with a brass or chrome inlay for decorative joint design.

Schlüter®-DILEX-EZ 70


  1. Schlüter®-DILEX-EZ 70 entsprechend der Konstruktionshöhe durch eventuelles Abtrennen von Profilsegmenten auf passende Höhe bringen.
  2. Profil gegen den Randbereich eines fertiggestellten Belagsfeldes oberflächenbündig verlegen. Schlüter®-DILEX-EZ 70 muss seitlich vollsatt eingebettet sein.
  3. Das angrenzende Belagsfeld oberflächenbündig gegen das Profil anarbeiten. Schlüter®-DILEX-EZ 70 muss seitlich vollsatt eingebettet sein.
  4. Abschließend den verbleibenden Fugenraum zwischen Profil und Belag mit Fugmaterial ausfüllen.

Schlüter®-DILEX-EZ 70


Schlüter®-DILEX-EZ consists of rigid PVC side walls connected by soft PVC at top and bottom. The top connection, which is the visible surface, is also available with a decorative brass or chrome foil inlay that is protected by a transparent PVC layer.

The profiles with inserts of brass or chrome material are coated with a protective layer of transparent PVC. The bottom section of the profile consists of detachable segments made of soft PVC. The upper side walls feature dove-tailed ribs for anchoring the profile to the mortar bed.

Material properties and areas of application:
The material is resistant to most chemicals encountered in tiled environments. 

Schlüter®-DILEX-EZ 70 is installed as a movement joint in coverings, e.g. ceramic tiles and pavers, set in a mortar bed. The profile divides the covering into fields. Its centre zone, made of soft PVC, equalizes compressive stresses. In addition, brass or chrome-coloured inlays offer decorative design options.

In special cases, the suitability of a proposed type of profile must be verified based on the anticipated chemical, mechanical, and/or other stresses.

Schlüter®-DILEX-EZ 70


Schlüter®-DILEX-EZ 70 is resistant to fungi and bacteria and requires no special maintenance. Clean the profile along with the tiled surface using common household cleaning agents.

Schlüter®-DILEX-EZ 70


Schlüter®-DILEX-EZ 70

G = grey

Schlüter®-DILEX-EZ 70

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit