Schlüter®-DILEX-EZ 6/9 | Installation | Schlüter-Systems

Schlüter®-DILEX-EZ 6/9


  1. Select Schlüter®-DILEX-EZ 6 or Schlüter®- DILEX-EZ 9 according to tile thickness. Regarding tile thicknesses greater than 9 mm, Schlüter®-DILEX-EZ 9 must be back filled with tile adhesive. 
  2. Set tiles up to the point where Schlüter®- DILEX-EZ is to be installed. Trowel tile adhesive obliquely to the tile edge. Press the Schlüter®-DILEX-EZ profile flush against the tile surface so that the ribbed hourglass shaped section is completely embedded in tile adhesive. 
  3. For the next row of tiles, trowel tile adhesive obliquely to the edge of the Schlüter®- DILEX-EZ profile already set, then set the tiles flush against the profile. 
  4. Schlüter®-DILEX-EZ may be installed without joint or with a small joint to the adjacent tile. Product

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit