Schlüter®-DILEX-EP | Installation | Schlüter-Systems



  1. Place Schlüter®-DILEX-EP on the substrate and adjust according to height and alignment (congruent to the surface movement joint later installed in the tile.)
  2. If the height needs adjustment, place a thin layer of mortar or other suitable base underneath.
  3. Secure profile with mortar to prevent movement. The top edge of the profile also serves as a screeding guide for the screed surface.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit