Schlüter®-DILEX-EMP | Installation | Schlüter-Systems



  1. Select Schlüter®-DILEX-EMP in accordance with the height of the overall floor assembly.
  2. Set the profile flush against the edge of a completed field of surface covering (Note: The profile should not be higher than the tile, but rather flush or up to approx. 1 mm lower). The side section of the profile must be adhered to the mortar bed with a slurry coat. 
  3. Set the adjoining field of the surface covering flush against the profile, ensuring solid coverage. 
  4. Leave a joint of approx. 2 mm between the tile covering and the profile; fill the joint completely with grout.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit