Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-DILEX-EKE/-EF

Installation of Schlüter®-DILEX-EKE

  1. Select Schlüter-DILEX-EKE according to the tile thickness. The profile height “U” must be sufficient to enable insertion of the tile into the chamber (e.g. U 11 for a tile thickness of approx. 8–10 mm).
  2. Embed the trapezoid perforated anchoring legs, firmly press the profile into the adhesive and trowel mortar over the profile legs.
  3. Install the tiles on one side, leaving a joint of approx. 2 mm between the tiles and the profile. Insert the cut edge of the tile into the profile chamber on the other side, using a sufficient amount of adhesive to completely fill the space between the rear wall of the chamber and the tile.
  4. Completely fill the space between the profile and the tile with grout.


Installation of Schlüter®-DILEX-EF

  1. Select Schlüter-DILEX-EF according to the tile thickness to ensure that the tile surface is either flush with the profile edge or up to approx. 2 mm lower.
  2. Embed the trapezoid perforated anchoring legs, firmly press the profile into the adhesive and trowel mortar over the profile legs.
  3. Leave a gap of approx. 2 mm between the tiles and the profile.
  4. Completely fill the space between the profile and the tile with grout.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit