Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-DILEX-BWA

Installation

  1.  Select Schlüter®-DILEX-BWA according to tile thickness.
  2. Apply tile adhesive to the edge area where the profile is to be installed, using an appropriate trowel.
  3. The undercut chamber of the exterior finishing leg can be filled with epoxy resin adhesive, silicone etc. as needed to bond the profile to the structural element.
  4. Press the trapezoid-perforated anchoring leg of Schlüter®-DILEX-BWA into the adhesive and bond it firmly to the structural element.
  5. Trowel additional tile adhesive over the trapezoid-perforated anchoring leg to ensure full coverage and solid bedding.
  6. Firmly press the adjoining tiles into place and align them flush with the upper profile edge.
  7. Leave a joint of approximately 2 mm to the profile.
  8. Completely fill the space between the tiles and the profile with grout.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit