Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information




  1. Thoroughly clean the contact area on adjoining fixtures where the profile will be positioned. 
  2. Using a notched trowel, apply tile adhesive over the area where the trapezoidperforated anchoring leg will be placed. 
  3. Remove the silicone paper from the self-adhesive tape. Press the profile with self-adhesive tape against the fixture in such a way that the perforated anchoring leg can also be pressed into the applied tile adhesive. 
  4. Install necessary internal corners and end caps with silicone or Schlüter®-KERDI-FIX. 
  5. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
  6. A joint of approx. 2 mm - 3 mm should be left between the tile and the profile. 
  7. Fill the joint completely with grout.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit