Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-DILEX-AHK /-AHKA /-AHK-TS

Material

Schlüter®-DILEX-AHK/-AHKA are made of aluminium with different finishes.

Schlüter®-DILEX-AHK:
AE         = Anodised aluminium
ACB      = Polished chrome anod. aluminium
ACGB   = Brushed chrome anod. Aluminium
TS         = Aluminium, textured coating


Material properties and areas of application:

The suitability of Schlüter®-DILEX-AHK/- AHKA must be verified based on the anticipated chemical stresses. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminium is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminium hydroxide formation). For this reason, remove mortar or grouting material immediately from all visible areas and do not cover freshly installed coverings with foil.

Finishes that have been coated with an anodised layer will not show any further changes during normal use. They should be protected against abrasion.

Schlüter®-DILEX-AHK-TS (aluminium with textured coating) is a finish with a natural character.

The coating is colour-stable, as well as UVand weather-resistant. Visible edges should also be protected against abrasion.

The profiles must be solidly embedded in the tile setting material to prevent alkaline water from accumulating in small cavities.

 


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit