Schlüter®-DESIGNLINE | Material | Schlüter-Systems



Schlüter®-DESIGNLINE is available in the following materials:

  • E = Stainless steel V2A, polished (material no. 1.4301 = AISI 304)
  • EB = Brushed stainless steel
  • ES = Structured stainless steel
  • MC = Chrome plated brass
  • AE = Anodised aluminium
  • AK = Satin copper/bronze anodised aluminium
  • AM = Satin brass anodised aluminium
  • AT = Satin titanium anodised aluminium
  • ACG = Polished chrome anodised aluminium
  • AKG = Polished copper/bronze anodised aluminium
  • AMG = Polished brass anodised aluminium
  • ATG = Polished titanium anodised aluminium
  • ACGB = Brushed chrome anodised aluminium
  • AKGB = Brushed copper/bronze anodised aluminium
  • AMGB = Brushed brass anodised aluminium
  • ATGB = Brushed titanium anodised aluminium

Material properties and areas of application:
Schlüter®-DESIGNLINE is available in a wide variety of materials and finishes. In special cases, the suitability of the profile must be verified, based on the anticipated chemical or mechanical stresses. The information provided below is intended as a general guideline.

Schlüter®-DESIGNLINE-E is made of roll formed stainless steel V2A (material no. 1.4301 = AISI 304). Stainless steel is particularly well suited for applications that, in addition to heavy mechanical stresses, require resistance to chemicals such as acidic or alkaline media and detergents. Even stainless steel is not resistant to all chemical stresses, and may be affected by hydrochloric and hydrofluoric acid or certain chloride and brine concentrations. In certain cases, this also applies to seawater pools. Special anticipated stresses should therefore be verified in advance.

Schlüter®-DESIGNLINE-MC (brass with chrome finish) is particularly well suited for wall coverings, for example to match chrome-plated fittings in bathrooms. Visible surfaces should be protected against abrasion. Mortar and grouting material should be removed immediately.

Schlüter®-DESIGNLINE-AE/ -ACG/ -ACGB/ -AM/ -AMG/ -AMGB/ -AK/ -AKG/ -AKGB/ -AT/ -ATG/ -ATGB (anodised aluminium): The aluminium features an anodised finish that retains a uniform appearance during normal use. Surface areas must be protected against abrasion or scratching. Aluminium is sensitive to alkaline media. Cementitious materials, in conjunction with moisture, become alkaline, which may result in corrosion depending on the concentration and length of exposure (aluminium hydroxide formation). For this reason, remove mortar or grouting material immediately from all visible areas and do not cover freshly installed coverings with foil. In addition, ensure that the profile is solidly embedded in the setting material to prevent water from accumulating in small cavities.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit