Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-DECO

Material

Schlüter®-DECO is available in the following materials:

  • E = stainless steel V2A (material no. 1.4301 = AISI 304)
  • MC = chrome-plated brass
  • A = aluminium M = brass
  • AE = anodised aluminium


Material properties and areas of application:
The suitability of a profile for the application must be verified, based on anticipated chemical, mechanical, and/or other stresses.

Schlüter®-DECO-M brass profiles are resistant to most chemicals used in tiled environments. Solid brass that is exposed to air will oxidise, resulting in a natural patina. If exposed to moisture or aggressive substances, heavy oxidation and spotting may occur. Minor manufacturing flaws are unavoidable on their untreated surfaces.

Schlüter®-DECO-MC is particularly suited for coverings, e.g. to match chrome plated bathroom fixtures. Visible surfaces should be protected against abrasion. Remove mortar and grout residue immediately.

Schlüter®-DECO-E is made of roll formed V2A stainless steel (material no. 1.4301). The profile structure therefore varies slightly from the extruded brass and aluminium versions. Stainless steel is particularly well suited for applications that, in addition to high mechanical stresses, require resistance to chemicals such as acidic or alkaline substances or cleaning agents. Even stainless steel is not resistant to all chemical stresses, and may be affected by hydrochloric and hydrofluoric acid or certain chloride and brine concentrations. In certain cases, this also applies to seawater pools. Special anticipated stresses should therefore be verified in advance.

Schlüter®-DECO-A are profiles made of aluminium. Minor manufacturing flaws are unavoidable on their untreated surfaces. The suitability of the profiles should be reviewed based on the anticipated chemical stresses. Aluminium is sensitive to alkaline media. Cementitious materials, in conjunction with moisture, become alkaline, which may result in corrosion depending on the concentration and length of exposure (aluminium hydroxide formation). Therefore, it is important to immediately remove mortar or grout residue from visible surfaces. It must be ensured that the profile is solidly embedded in the setting material to prevent alkaline water from accumulating in small cavities.

Schlüter®-DECO-AE, made of anodised aluminium, has an anodised surface finish that will not change under normal circumstances. The finish may be damaged by aggressive substances or abrasive stresses. Aluminium is sensitive to alkaline media. Cementitious materials, in conjunction with moisture, become alkaline, which may result in corrosion depending on the concentration and length of exposure (aluminium hydroxide formation). For this reason, remove mortar or grouting material immediately from all visible areas and do not cover freshly installed coverings with foil. In addition, ensure that the profile is solidly embedded in the setting material to prevent water from accumulating in small cavities.


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit  


Schlüter® profiles with radius perforations
Schlüter® profiles with radius perforations

Schlüter®-RUMA
Schlüter®-RUMA

Bending machine for profiles with radius perforations.