Schlüter®-BEKOTEC-THERM-DA | Schlüter-Systems


Schlüter®- BEKOTEC-THERM-DA is a set of twin connectors made of nickel plated brass. It features a 3/4" (DN 20) cone joint nut on one side and two 3/4" (DN 20) cone connector threads on the other side for connecting the Schlüter heating pipes with diameters of 12 mm, 14 mm or 16 mm. The twin connector allows for setting up a second heating circuit at the control station BTBMS/ RT. In this case, the heating circuits must have approximately the same lengths and performance ratings.



Note: The connection to the Schlüter®- BEKOTEC-THERM heating pipes requires 1 set of clamp connections BTZ 2 KV … as well as two angle clips BTZW 1418.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit