Schlüter®-BEKOTEC-EN 2520 /-EN 1520 PF | Supplementary Products | Schlüter-Systems


Supplementary System Products

Edge board

The edge board, Schlüter®-BEKOTEC-ENR 1520P, is used at edge and recessed areas to simplify cutting and minimise waste. It consists of EPS 040 DEO material and features a mortise and tenon type edge design for interconnection. The boards can be placed along their longer sides. Packaging: 20 pieces per box Dimensions: 30.5 x 45.5 cm Thickness: 20 mm

Edging strip for conventional screeds

Schlüter®-BEKOTEC-BRS 810 is an edging strip made of closed cell polyethylene foam with an integrated foil leg. The edge strip is positioned at floor to wall transitions or fixed building elements, with the foil leg placed onto the substrate below the Schlüter®-BEKOTEC panel between the substrate (or the top insulation layer) and the studded panel. Roll: 50 m length x 10 cm width x 8 mm thickness Schlüter®-BEKOTEC-BRSK 810 is identical to the above edging strip, but features an adhesive strip on the reverse side for attachment to walls. Roll: 50 m, width: 10 cm, thickness: 8 mm

Edging strip for flowing screeds

Schlüter-BEKOTEC-BRS 808 KSF is an edge strip made of closed-cell polyethylene foam with an integrated foil leg that features an adhesive strip on both sides for attachment. The adhesion on the substrate and the pre-tensioning of the integrated foil leg keep the edge strip attached to the wall. Placing the studded BEKOTEC panel on top of the adhesive strip
creates a connection that permanently attaches the panel to the substrate and prevents poured screed from flowing beneath the panel. Roll: 25 m, height: 8 cm, thickness: 8 mm

Impact sound insulation

Schlüter®-BEKOTEC-BTS is a 5 mm thick impact sound insulation membrane, made of closed cell polyethylene foam to be installed below Schlüter®-BEKOTEC-EN. The use of Schlüter®-BEKOTEC-BTS leads to significant improvement in impact sound insulation. The material can be used if the room height is not sufficient for the use of sound insulation material made of polystyrene or mineral fibre in the corresponding thickness. Roll: 50 m, width: 1.0 m, thickness: 5 mm

Expansion joint profile

Schlüter®-DILEX-DFP is an expansion joint profile for installation in door transition areas to prevent sound bridges. Thanks to the bilateral coating and the self adhesive strip, straight line installation is very easy. Length: 1.00 m, height: 60 / 80 / 100 mm, thickness: 10 mm Length: 2.50 m, height: 100 mm, thickness: 10 mm

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit