Cookies on the Schlüter-Website

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further information

logo

Schlüter®-BEKOTEC

Products


Schlüter®-BEKOTEC-EN/P

Schlüter®-BEKOTEC-EN/P consists of polystyrene (EPS 033 DEO), white, without foil coating and is most suited for conventional cement screeds.

Schlüter®-BEKOTEC-EN/P

Note: EN/P = screed panel without foil, e.g. conventional cementitious screeds
1 panel (0.8 m²) = smallest delivery unit


Schlüter®-BEKOTEC-EN/PF

Schlüter®-BEKOTEC-EN/PF is made of polystyrene (EPS 033 DEO) with an orange sheet coating and is therefore especially suited for flowing screeds (e.g. gypsum screeds).

Schlüter®-BEKOTEC-EN/PF

Note:
EN/PF = screed panel with sheet coating, suitable for flowing screeds, e.g. gypsum
screeds
1 panel (0.8 m²) = smallest delivery unit


Schlüter®-BEKOTEC-ENR

Schlüter®-BEKOTEC-ENR is an edge panel made of polystyrene (EPS 040 DEO) for optimising cuts of Schlüter®-BEKOTEC studded panels EN/P and EN/PF, adding small areas or filling small spaces between walls and upright structural Elements.

Schlüter®-BEKOTEC-ENR


Schlüter®-BEKOTEC-BTS

Schlüter®-BEKOTEC-BTS is a 5 mm thick insulation layer of closed cell polyethylene foam for installation below the studded screed panels Schlüter®-BEKOTEC-EN/P and -EN/PF. The use of Schlüter®-BEKOTEC-BTS results in a significant improvement of sound insulation. The material can be used if the required construction height is not sufficient for a thick insulation layer of polystyrene or mineral fibre. The maximum floor load must be limited to 2 kN/m².

Schlüter®-BEKOTEC-BTS

Note:
1 roll (50 m²) = delivery unit


Schlüter®-BEKOTEC-BRS

Schlüter®-BEKOTEC-BRS is an edging strip of closed cell polyethylene foam with an integrated foil leg. The edging strip is installed along walls or fixed room components. The foil leg is installed beneath the Schlüter®-BEKOTEC panels or the PE foil cover and is suitable for conventional cement screeds.

The finishing strip Schlüter®-BEKOTEC-BRSK is equipped with an additional adhesive strip for attachment to the wall.

Schlüter®-BEKOTEC-BRS

Note:
1 roll (50 m) = delivery unit


Schlüter®-BEKOTEC-BRS

Edging strip for conventional screeds

Schlüter®-BEKOTEC-BRS

Note: Is suitable in combination with Schlüter®-BEKOTEC-EN/P.

Edging strip for conventional screeds

Schlüter®-BEKOTEC-BRSK

Note: Is suitable in combination with Schlüter®-BEKOTEC-EN/P.

Schlüter®-BEKOTEC-BRS/KF

Schlüter®-BEKOTEC-BRS/KF is an edge strip of closed cell polyethylene foam with an adhesive leg and an adhesive backing for wall attachment. When the Schlüter®-BEKOTEC studded panel is laid on the PE adhesive, the resulting connection prevents flowing screeds from running underneath the assembly during Installation.

Schlüter®-BEKOTEC-BRS/KF

Note:
1 roll (25 m) = delivery unit


Schlüter®-BEKOTEC-BRS/KSF

Schlüter®-BEKOTEC-BRS/KSF is an edging strip of closed cell polyethylene foam with an integrated foil leg that features an adhesive strip on both sides for attachment. The edging strip is pressed toward the wall by the adhesion on the substrate and the pre tensioning of the integrated foil leg. When the studded panel Schlüter®-BEKOTEC is laid on top of the adhesive strip, flowing screed can no longer flow underneath the Panel.

Schlüter®-BEKOTEC-BRS/KSF

Note:
1 roll (25 m) = delivery unit
The edge strip BRS 808 KSF must be used with the studded screed panel EN 23 F and EN 18 FTS.


Schlüter®-BEKOTEC-BRS/KSF

Note:
1 roll (25 m) = delivery unit
The edge strip BRS 505 KSF must be used with studded screed panels EN 12 FK.


Schlüter®-DILEX-DFP

Schlüter®-DILEX-DFP is a movement joint profile to be installed at door areas or used to divide screed Areas.

Schlüter®-DILEX-DFP


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit