Schlüter®-BEKOTEC-EN 23 F | Supplementary Products | Schlüter-Systems

Schlüter®-BEKOTEC-EN 23 F

Supplementary System Products

Levelling panel
The levelling panel Schlüter®-BEKOTEC-ENFG is installed in door transition areas and in the area of heating circuit distributors to simplify connections and to minimise cutting waste. It consists of smooth polystyrene foil material and is adhered below the studded panels, using the supplied double sided adhesive tape.
Dimensions: 1275 x 975 mm
Thickness: 1.2 mm

Pipe clamping strip
Schlüter®-BEKOTEC-BTZRKL is a pipe clamping strip for securing the pipes on the levelling panel. The clamping strips are self adhesive to allow for permanent attachment.
Length: 20 cm, number of pipe spaces: 4 units

Double sided adhesive tape
Schlüter®-BEKOTEC-BTZDK66 is a double sided adhesive tape for adhering the studded panel to the levelling panel or to the substrate if necessary.
Roll: 66 m, height: 30 mm, thickness: 1 mm

Edge strip
Schlüter®-BEKOTEC-BRS/KSF is an edge strip of closed cell polyethylene foam with an integrated foil leg that features an adhesive strip on the underside for attachment. The adhesion on the substrate and the pre tensioning of the integrated foil leg push the edge strip toward the wall. When the studded Schlüter®-BEKOTEC panel is laid on top of the adhesive strip, the panel is permanently adhered to the substrate and flowing screed can no longer get beneath the panel.
Roll: 25 m, height: 8 cm, thickness: 8 mm

Impact sound insulation
Schlüter®-BEKOTEC-BTS is a 5 mm sound insulation membrane made of closed cell polyethylene foam to be installed below Schlüter®-BEKOTEC-EN 23 F. The use of Schlüter®- BEKOTEC-BTS leads to significant improvements in impact sound insulation. The material can be used if the room height is not sufficient for the use of sound insulation material made of polystyrene or mineral fibre.
Roll: 50 m, width: 1.0 m, thickness: 5 mm

Expansion joint profile
Schlüter®-DILEX-DFP is an expansion joint profile for installation in door transition areas to prevent sound bridges. Thanks to the bilateral coating and the self adhesive strip, straight line installation is very easy.
Length: 1.00 m, height: 60 / 80 / 100 mm, thickness: 10 mm
Length: 2.50 m, height: 100 mm, thickness: 10 mm

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit