Schlüter®-BARIN | Function | Schlüter-Systems
logo

Schlüter®-BARIN

Application and Function

Schlüter®-BARIN is a gutter system for balconies and terraces. All required accessories (e.g. mounting screws, internal and external corners, connectors, end caps, outlets, down pipes and spouts) are available.

Schlüter®-BARIN is connected with mounting screws to the balcony edging profiles, Schlüter®-BARA-RKLT, Schlüter®-BARA-RTK, Schlüter®-BARA-RTKE, Schlüter®-BARA-RTKEG, or Schlüter®-BARA-RTP.

Elongated slots at the back of the gutter make it possible to slope the gutter up to 30 mm. All components of the Schlüter®-BARIN system are attached to the gutter with the screw on connectors.


Schlüter®-BARIN

Installation

  1. Schlüter®-BARIN gutter components are cut to size and connected to the Schlüter®-BARA profile with the screws provided. The slots allow the gutter to be sloped, if required.
  2. A waterproof connection between two abutting gutter sections is achieved by centring a connector over the joint.
  3. The rubber seal ensures a waterproof connection at the joints.
  4. For inside and outside corners, the corner pieces are attached using two connectors, centred over the joint.
  5. To connect a down pipe, a gutter section with an outlet of approximately 20 cm is attached with two clip on connectors, which are centred over the gutter joints.
  6. The end caps are held against the gutter from below and attached with a connector.
  7. The screws and slots are covered by clipping on the cover profile.
  8. The last step is to adhere the edge covers.

Schlüter®-BARIN

Material

Schlüter®-BARIN gutter components, including covers, end caps, internal and external corners and connectors, are made of colour coated aluminium.

Additional prefabricated components of the Schlüter®-BARIN gutter system, such as down pipes, pipe clamps, elbows, tee pipes, spouts, adjustable spouts and clip on connectors, are also made of colour coated aluminium.

Material properties and areas of application
Schlüter®-BARIN is made of colour coated aluminium.

The colour coating is colour stable, as well as weather and UV resistant. Visible surfaces should be protected against abrasion.


Schlüter®-BARIN

Maintenance

Schlüter®-BARIN requires no special maintenance. The colour coated surface of the aluminium profile is colour stable. Damaged surfaces can be repaired with paint.


Schlüter®-BARIN

Products


Schlüter®-BARIN-SR

Schlüter®-BARIN-SR is a gutter system made of colour coated aluminium for the drainage of balconies and terraces. It can be attached to the matching Schlüter®-BARA profiles.

Schlüter®-BARIN-SR

* to complete the Art.-No., add the colour (e.g. BSR4 R 250 GM).

Colours:
BW - brilliant white, RAL 9003
GM - grey metallic, RAL 9006
HB - light beige, RAL 1019
PG - pastel grey, no RAL
RB - red brown, RAL 8003
SB - black brown, RAL 8019

Note: Internal and external corners in angles other than the standard angles are available as a special order upon request. Slight colour variations between individual system components may occur due to different materials.


Schlüter®-BARIN-R

Schlüter®-BARIN-R are matching pipes made of colour coated aluminium with matching moulded parts.

Schlüter®-BARIN-R

* to complete the Art.-No., add the colour (e.g. BR 100 DN 60 GM).

Colours:
BW - brilliant white, RAL 9003
GM - grey metallic, RAL 9006
HB - light beige, RAL 1019
PG - pastel grey, no RAL
RB - red brown, RAL 8003
SB - black brown, RAL 8019


Schlüter®-BARIN-R Z/K

Schlüter®-BARIN-R-SK is a downpipe cap that covers the connection of Schlüter®-BARIN system pipes (Ø 60 mm) to the in ground drainage system.

Schlüter®-BARIN-R-AZ is a tee pipe that connects Schlüter®-BARIN system pipes (Ø 60 mm) with the existing downpipes (Ø 110 mm- DN 100) of the roof drainage system.

Schlüter®-BARIN-R Z/K


Schlüter®-BARIN


Schlüter®-BARIN

Videos

Enjoy our videos showing the product itself as well as possible areas of application.


Balcony assembly: Loose installation of natural stone on mortar casting mould rings with drainage




Gutter system for balconies and terraces: Schlüter®-BARIN




Balcony assembly: Tile installation with drainage, waterproofing, and uncoupling




Balcony assembly: Loose installation of natural stone on mortar casting mould rings with drainage




Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit