Schlüter®-BARA-RW | Installation | Schlüter-Systems



  1. Select Schlüter®-BARA-RW according to the height of the floor assembly to be covered. Prefabricated corners and connectors are available for inside corners, outside corners, and butt joints. Abut the ends of the Schlüter®-BARA-RW profile, leaving approx. a 5 mm joint. Cover the joint with the snap-on connector. At the edges of the structural slab, place the anchoring leg of Schlüter®-BARA-RW on a thin layer of mortar, vertically align, and fix into position.
  2. Fully embed the trapezoid perforated anchoring leg of the Schlüter®-BARA-RW profile into the contact layer of thin bed mortar, and cover completely.
  3. The Schlüter®-DITRA 25 waterproofing membrane should abut the edge of the profile. The remaining joint between the Schlüter®-DITRA 25 waterproofing membrane and the profile is covered with Schlüter®-KERDI-BAND. Use the sealing adhesive Schlüter®-KERDI-COLL or the installation adhesive Schlüter®-KERDI-FIX to attach the sealing tape with an overlap of at least 5 cm on Schlüter®-DITRA 25 and to the angled edge of Schlüter®- BARA-RW.
  4. Note: Lay the tile in such a way that it protrudes approximately 10 mm over the edge of the profile. If a balcony border tile is to be used, keep a space of at least 10 mm between the vertical leg of the trim and the edging profile. The drip lip cannot prevent the dripping water from coming into contact with the front edge or the wall area in all cases.

Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Metal surfaces
Metal surfaces

All surfaces at a glance

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   


H = height
L = length
B = width

PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit  

Schlüter® profiles with radius perforations
Schlüter® profiles with radius perforations