Schlüter®-BARA-RTP | Function | Schlüter-Systems
logo

Schlüter®-BARA-RTP

Application and Function

Schlüter®-BARA-RTP is an edging profile that accommodates the Schlüter®-BARIN gutter system. The profile is subsequently installed at the exposed edges of existing floor coverings on balconies and terraces. Schlüter®-BARA-RTP is attached to the front of the exposed edges on balconies and terraces via bolts, 5 mm in diameter, that are placed at approximately 50 cm intervals.

A T-shaped channel has been provided at the lower end of the Schlüter®-BARA-RTP for attaching the Schlüter®-BARIN gutter using self-tapping screws. Slotted holes in the Schlüter®-BARIN gutter system allow the Schlüter®-BARA-RTP profile to be adjusted vertically.


Schlüter®-BARA-RTP

Installation

  1. To fasten the Schlüter®-BARA-RTP edging profile, drill holes, 8 mm in diameter, into the front edge of the floor covering at approximately 50 cm intervals. To align with the holes provided in the profile, Schlüter®-BARA-RTP can be placed against the front edge and used as a drilling template.
  2. After inserting the anchors, the Schlüter®- BARA-RTP edging profile should be fastened with Schlüter®-BARA-RTPS 540 special bolts. To ensure solid contact of Schlüter®-BARA-RTP to the front edge of the covering assembly, it is advisable to fill the rear ribs of the edging profile with dry-set mortar first.
  3. Once Schlüter®-BARA-RTP has been mounted, the Schlüter®-BARIN gutter system can be attached at the required slope. To do this, fasten the vertically adjustable Schlüter®-BARA-RTP gutter-support profile to the Schlüter®-BARA-RTP edging profile. The Schlüter®-BARA-RTP features slotted holes for establishing the proper slope, if required.
  4. Note: Pre-fabricated corners and connectors are available for internal corners, external corners, and butt joints. The profile ends of Schlüter®-BARA-RTP are to be abutted, leaving an approx. 5 mm wide joint. The joint is covered with the snap-on connector.

Schlüter®-BARA-RTP

Material

Schlüter®-BARA-RTP is made of pre-treated (chromated), colour-coated aluminium.

Material properties and areas of application
The coating of the aluminium profile is colourfast, weather and UV-resistant. Visible surfaces should be protected against abrasion. In special cases, the suitability of Schlüter®- BARA-RTP must be verified based on the anticipated chemical, mechanical, and/or other stresses.


Schlüter®-BARA-RTP

Maintenance

Schlüter®-BARA-RTP requires no special maintenance or care. The coated surface of the aluminium profile is colourfast and UV-resistant. Damaged visible surfaces can be repaired with paint.


Schlüter®-BARA-RTP

Products


Schlüter®-BARA-RTP


Schlüter®-BARA-RTP/E


Schlüter®-BARA-RTP/E


Schlüter®-BARA-RTP/S

Set = 10 units


Schlüter®-BARA-RTP/I


Schlüter®-BARA-RT/V


Schlüter®-BARA-RTP


Contact Schlüter-Systems Ltd

Units 3-5 Bardon 22,
Beveridge Lane, Coalville,
Leicestershire, LE67 1TE
Phone: +44 (0) 1530 813396

Quick contact list

Reach the department of your choice directly via email:

image
Write To Us!

Do you have a question or suggestion?

Further information

on our products and specifications can be found here:

Schlüter colour key
Schlüter colour key

From brilliant white to brick red - here you will find an overview of all available product colours.

Legend "Products"

We use the following symbols and abbreviations to illustrate our price charts.

image image

= new products

= radius perforation available   

 

Dimensions:
H = height
L = length
B = width


Packaging:
PL = euro pallet 
KV = case packaging 
BV = bundle (there is a 10 item bundle packaging for all the profile types)
P = box packaging 
R = roll
St. = unit